-
INSULATED CUT LEVEL A4 WORK GLOVES (12 PACK)
SKU: VARIOUS. Comfort, lightweight and durability cut resistant gloves are critical to maintaining safety in any work environment, especially in cold conditions. Malta Dynamics made the work gloves that our crews asked for. Ask your rep for a sample pair of gloves! These insulated cut rated A4 work gloves are designed as the ideal winter glove for colder environments, offering warmth and maximum protection in cold weather. Made from quality materials, they ensure industry standard durability and comfort while providing a full range of motion and flexibility for your fingers. With heavy-duty construction and high visibility, these winter work gloves are perfect for cold environments where safety and dexterity are critical. Whether tackling tough winter tasks or working in challenging conditions, these gloves offer the right blend of warmth and protection to meet the demands of any temperature job. Product Downloads: Gloves Spec Sheet Gloves Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]$71.99 Select options This product has multiple variants. The options may be chosen on the product page -
INSULATED CUT LEVEL A4 WORK GLOVES (144 Pairs)
SKU: G7003-144. Comfortable, lightweight and durable cut resistant gloves are critical to maintaining safety in any work environment and ANSI cut rated: A4. Malta Dynamics made the work gloves that our crews asked for. Ask your rep for a sample! Product Downloads: Gloves Spec Sheet Gloves Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]$779.99 Select options This product has multiple variants. The options may be chosen on the product page -
INTERMEDIATE BY-PASS ADAPTOR
SKU: P-00149-3. Intermediate by-pass adapter can be added to any MD post to help workers continue along the horizontal path of the i-beam or concrete beam they are walking on. The unique design keeps the systems horizontal cable in place while still allowing workers enough room to pass the snap hook of their lanyard through the intermediate adapter without ever needing to disconnect from the horizontal lifeline cable system. Additional posts are commonly used in areas where not much clearance exists from where workers are walking on the beams to an obstruction below, typically the graound. Reduces the amount of horizontal cable sag. Sold as one (1) each. Intermediate by-pass adapter can be added to any MD post to help workers continue along the horizontal path of the i-beam or concrete beam they are walking on. The unique design keeps the systems horizontal cable in place while still allowing workers enough room to pass the snap hook of their lanyard through the intermediate adapter without ever needing to disconnect from the horizontal lifeline cable system. Additional posts are commonly used in areas where not much clearance exists from where workers are walking on the beams to an obstruction below, typically the graound. Reduces the amount of horizontal cable sag. Sold as one (1) each. Product Downloads: Lifeline Manual [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget] -
KONG 30′ BACK-UP LIFELINE
SKU: C7064. Usage activities ROOF AND INCLINED PLANES METAL STRUCTURES ROPE ACCESS CONFINED SPACES TREECLIMBING / ARBORICULTURE -
KONG BACK-UP ANSI – FALL ARRESTER – TWISTLOCK CARABINER
SKU: C7061. The KONG BACK-UP (8021NO400KK) is a fall arrester for a flexible anchor line developed for work at height fall protection systems. Ideal for systems using a 10.5mm or 11mm EN1891 type A line. Employing a toothless mechanism to reduce possible damage to the rope, this device is one of the least aggressive on the market for textile ropes . Supplied with an OVALONE CARBON connector, it can even be used without a lanyard or energy absorber. It features a selector lever that allows you to choose between two modes of use: free sliding along the rope in both directions upward sliding only, which allows the user to reduce the fall factor. It may also be used as an ascender or as a rope clamp for rescue systems. Also available in BACK-UP ANSI version. Supplied with an OVALONE CARBON ANSI connector, this version also complies with ANSI Z359.15. A special lanyard with fall indicator is also included in the package . High quality, made in Italy! Manual DoC -
KONG BACK-UP SHOCK PACK Discontinued
SKU: C7063. 20” shock absorbing lanyard with black aluminum snap hook and reinforced eye Meets or exceeds: OSHA 1910 and 1926 ANSI Z359.15 Meets or exceeds: OSHA 1910 and 1926 ANSI Z359.15 Webbing loop avoids a metal to metal connection -
KONG WORK POSITIONING Y-LANYARD
SKU: C7065. KONG Y Positioning Lanyard for fall restraint. (9VP000022KK) Light weight aluminum snap hooks. It can be used with the BACK-UP according to ANSI and CSA standards. Materials: 10000lb Nylon Webbing Size/Dimensions: 55,88 cm (22 inch) Meets or Exceeds: OSHA 1910 and 1926 ANSI Z359.3, ANSI Z359.12, CSA Z259.11 -
LINEMAN’S CLIMBING STRAP
SKU: HEA2000. The Malta Hunting Safety Lineman’s Climbing Strap is crafted to accompany our complete line of Malta Hunting Harnesses perfectly. Using the strap allows you to safely climb a tree to install your tree stands or steps while keeping your hands free. The high-strength polyester strap is easily adjustable and features steel carabiners that attach directly to the sewn-in Lineman’s Loops on our Malta Hunting Harnesses. Wrap the strap around the trunk and adjust the tension using the steel buckle as you ascend the tree. Note: This accessory must be used in conjunction with a Tree Strap, Safety Harness, and Harness Tether. Product Downloads: Spec Sheet -
MALTA DYNAMICS 18” D-RING EXTENDER
SKU: C5010. Offers a quick and easy way to add length to the back D-Ring of harnesses Users can more easily attach their lanyards while wearing a harness Snap hook component attaches directly to the dorsal D-Ring of the harness The 18” D-Ring Extender becomes the new connection point to the harness Just connect your lanyard to the O-Ring on the extension and you’re all set Consists of strong polyester fabric and galvanized steel hardware for long-lasting protection Minimum tensile breaking strength of 5,000 pounds (22.2 kN) ANSI rated for 130-310 pounds, including equipment and clothing Offers significant fall protection This safety harness extender is not appropriate for use in leading-edge/foot-level tie-off applications It makes a great complement to our safety harnesses and harness accessories The Malta Dynamics D-Ring extension can improve ease of use for fall arrest and fall restraint systems, allowing for quick attachment and release when needed. It is only intended for these two applications and is not suitable for work positioning, suspension or rescue. Things to Know Before Using a D-Ring Extension Lanyard and retractable extenders can be a valuable part of a fall or restraint system, but only if used appropriately. As with most pieces of equipment, you'll need to thoroughly inspect the safety harness D-Ring extension for any damage, excessive wear or soiling from contaminants. Ensure all hardware works correctly and that the snap hook gate can stay closed and locked. Webbing must be free of cuts, fraying and wear. Here are a few other things to keep in mind when using safety harness extenders: Training: All employees using the D-Ring extender or other fall protection systems must be trained for appropriate use by a Competent Person as defined by OSHA. Free fall distance: Remember to factor in the extender's length when calculating fall clearance. The D-Ring extension will increase a user's potential free fall distance and will need to be included in calculations regarding deceleration distance and connecting subsystems length. Arrest forces: When used in a Personal Fall Arrest System (PFAS), the D-Ring extenders should be employed with other components that limit maximum arrest forces to 1,800 pounds (8 kN) or less. For fall restraint systems, the D-Ring extension can help prevent workers from reaching a hazard but should not be used for vertical free fall. Falls on the worksite: Remove the equipment from service if a fall occurs. Anchorage strength: Ensure anchorage strength requirements are met based on certification and application. Connector compatibility: Ensure all connectors used are compatible with the Malta Dynamics D-Ring Extender and your application. Avoid connecting multiple snap hooks or carabiners to one D-Ring. Other inappropriate connections include a snap hook connected to an integral lanyard or to a horizontal lifeline. See the product manual for more information on connections. These points are general guidelines. Please read the user manual and any applicable standards for more comprehensive use instructions and information based on your application. Working With Malta Dynamics The team at Malta Dynamics is full of people with extensive, hands-on experience in the industries we serve and who use our fall protection equipment daily. That means we understand our customers' needs and strive to help them put safety first with quality safety equipment that exceeds OSHA requirements. Our ISO-17025 lab and ANSI testing procedures prove adherence to rigorous third-party standards and are part of what makes us a nationwide leader in fall protection. We offer a 100% satisfaction guarantee and certification for all of our products. If you want to learn more about the Malta Dynamics 18" D-Ring Extender, our team is happy to assist. Reach out to us if you have any questions by calling (800) 494-1840. Product Downloads: D-Ring Extender Manual D-Ring Extender Spec Sheet Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget] -
MD POST FOR CONCRETE BEAMS
SKU: P-00041-10. Stanchion post for bolting to concrete or steel beams. Max Flange 1/2” to 12” (steel). Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System. Contact us to order: (800) 494 1840 Stanchion post for bolting to concrete or steel beams. Max Flange 1/2” to 12” (steel). Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System. Product Downloads: Lifeline Manual [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget] -
MD POST FOR STEEL I-BEAMS
SKU: P-00041-1. Stanchion post for clamping to steel I-beams - Fits flange thicknesses form 1/2" to 2 1/4" . Fits flange widths from 8" to 22". Simple easy set up! Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System. Contact us to order: (800) 494 1840 Stanchion post for clamping to steel I-beams - Fits flange thicknesses form 1/2" to 2 1/4" . Fits flange widths from 8" to 22". Simple easy set up! Sold as one (1) each. Can be used as a single tie-off anchor point or as part of an MD Stanchion Post Horizontal Lifeline Fall Protection System. Product Downloads: Lifeline Manual [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget] -
NEW HIRE FALL PROTECTION AND SAFETY KIT
SKU: VARIOUS. Provide all the safety equipment your new hires need in a convenient carry bag. The new hire fall protection and safety kit includes everything your latest team members will need to work safely at heights and be visible on worksites. Be seen with the high-visibility vest, long-sleeve and short-sleeve shirts, and protect yourself with a hard hat, safety gloves, and clear and tinted safety glasses. Products Included: Harness Short Sleeve Shirt Long Sleeve Shirt Hi-Vis Vest Hard Hat Tinted Safety Glasses Clear Safety Glasses Bag [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]$135.99 Select options This product has multiple variants. The options may be chosen on the product page
Shop
Choosing the right safety harness and accessories for your crew or your work is important. Whether you work in roofing, masonry, steel, manufacturing, or anything else, we have the features that you need for working any period of time at heights.
- Highest Quality
- Field Tested
- Maximum Comfort
- ANSI/OSHA Compliant
