=
-
4’ MALTA DYNAMICS CONCRETE ANCHOR STRAP
SKU: A6400. The Malta Dynamics Concrete Anchor Strap is made up of a strong polyester web inner core which is further protected by a heavy-duty polyester web sheath. The premium sheath protects the inner core from abrasion and wear and extends its overall life. The Malta Dynamics Concrete Anchor strap can be used as a permanent anchor during building construction or as a temporary anchor in applications such as wood framework, rebar work, or pipe racking. As always, be sure the selected attachment point can withstand anticipated fall loads and meet or exceed OSHA required anchorage strength requirements. When attached to a suitable structure, the Malta Dynamics Concrete Anchor Strap provides workers with a safe, compliant anchor point. Instructions for Installation: Select a safe location for the Concrete Anchor Strap. The location must meet the OSHA-required minimum anchor strength requirement. In cases of doubt please contact a qualified or competent person for more information. Once a section of wall of concrete column has been poured and cured, place Concrete Anchor Strap User Instruction Manual MaltaDynamics.com | 800-494-1840 12 Manual Revision Code: MD-CASUIM 11-12-18 the looped end of the anchor onto a vertical piece of steel rebar. After the anchor(s) are in place, continue to pour concrete, allowing it to cure fully. After removing forms, anchors will remain on the face of the column or in between the seams of shear walls. For Reinforced Concrete Floor Slabs: A three-foot length of rebar may pass through the loop end of the anchor strap and wire tied to remain tightly in place to the underside of the upper mat of rebar. This provides 3.5” of clearance. Concrete can then be poured, and the anchor strap will become cast into place for use after curing is finished. Free fall distance must not exceed six feet at any time. Locate the attachment point to the anchor at or above the connection point of the fall arrest equipment to the harness. Product Downloads: Anchor Manual Anchor Spec Sheet Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget] -
APEX Type 2 Class C Full Brim Safety Helmets
SKU: VARIOUS. The Malta Dynamics APEX Type 2 Full Brim Vented Safety Helmet is engineered to deliver maximum protection and superior ventilation for workers in hot and demanding environments. Offering top, side, front, and back impact protection, this helmet meets ANSI Z89.1-2014 Type 2 Class C standards, providing lightweight and breathable head protection without compromising on safety. It is also compliant with EN12492, OSHA 1910, and OSHA 1926 regulations to ensure your crew stays fully protected and jobsite-ready. Constructed with a durable, lightweight ABS shell, the full-brim design shields workers from sun and falling debris, while strategically placed vents allow optimal airflow to keep workers cool and comfortable all day long. The adjustable,4-point chin strap keeps the helmet securely in place during falls or sudden movements, and the comfort-fit headband with ratchet suspension provides a snug, customized fit for head sizes 6 ½ to 8. Equipped with WaveOn Technology, this helmet provides instant access to manuals, certifications, and inspection records with a simple tap—streamlining compliance and boosting jobsite efficiency. Available in White, Grey, Black and Yellow, the APEX Type 2 Class C Full Brim Vented Helmet combines rugged performance with professional style. At Malta Dynamics, we know your safety gear should reflect your brand. That’s why we offer custom logo printing, allowing you to outfit your team with helmets that showcase your company’s identity while delivering premium protection. Field Tested. Field Approved. Trusted by real crews working in real-world conditions. Helmet Manual Specifications Helmet Declaration of Conformity$79.99 Select options This product has multiple variants. The options may be chosen on the product page -
APEX Type 2 Class E Full Brim Safety Helmets
SKU: VARIOUS. The Malta Dynamics APEX Type 2 Full Brim Safety Helmet is designed to deliver maximum protection and all-day comfort for workers in demanding environments. Offering top, side, front, and back impact protection, this helmet meets ANSI Z89.1-2014 Type 2 Class E standards and provides electrical insulation up to 20,000 volts. It is also compliant with EN12492, OSHA 1910, and OSHA 1926 regulations, ensuring your crew is fully protected and jobsite-ready. Built with a durable, lightweight ABS shell, the full-brim design shields workers from sun, rain, and falling debris. The adjustable, removable 4-point chin strap keeps the helmet securely in place during falls or sudden movements, and the comfort-fit headband with ratchet suspension allows a customized fit for head sizes 6 ½ to 8. Equipped with WaveOn Technology, this helmet provides instant access to manuals, certifications, and inspection records with a simple tap—streamlining compliance and boosting efficiency. Available in White, Grey, and Yellow, the APEX Type 2 Class E Full Brim Helmet combines rugged performance with professional style. At Malta Dynamics, we know your safety gear should reflect your brand. That’s why we offer custom logo printing, allowing you to outfit your team with helmets that showcase your company’s identity while delivering premium protection. Field Tested. Field Approved. Trusted by real crews working in real-world conditions. Helmet Spec Sheet Helmet Manual Helmet Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]$79.99 Select options This product has multiple variants. The options may be chosen on the product page -
SAFETY HELMET VISORS
SKU: VARIOUS. A clear or tinted visor is the perfect addition to your Malta Dynamics Safety Helmet. These safety visors can be added to your helmet to create an additional safety protection factor for your eyes. The visors are made from durable high-strength plastic and meet the ANSI/ISEA Z87.1-2015 impact rating standard. They can be installed and removed from your safety helmet as you please and feature an anti-scratch lens with an easy-clean rimless design. You don’t need any special chemicals to clean your visors, just use warm water and soap to bring them to a shiny clean. These safety helmet visors can be purchased in a crystal clear or tinted variety. The tinted visors are 99% UV resistant to shield your eyes from the sun’s powerful rays. Adding a visor to your safety helmet frees your hands from having to adjust and reposition normal safety glasses, and a visor keeps the lens off your face completely. No more temple pain behind your ears from the pressure of regular safety glasses, and you’ll never have to worry about your eye protection falling off because the visors are attached to your safety helmet, which has a chin strap. When you don’t need eye protection, you can easily remove it or simply push the visor up on your helmet out of the way. The hinge feature allows you to position the visor and adjust where it sits, so it’s there when you need it and stowed when you don’t. Completely secure head protection and eye protection all in one! Product Downloads: Helmet Manual Helmet Spec Sheet Declaration of Conformity-HTV0001 Declaration of Conformity-HTV0002 [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]Price range: $9.99 through $19.99 Select options This product has multiple variants. The options may be chosen on the product page -
APEX Type 2 Safety Helmets
SKU: VARIOUS. The Malta Dynamics APEX Type 2 Safety Helmet is engineered to deliver superior protection and all-day comfort for workers in demanding environments. Featuring top, side, front, and back impact protection, this helmet meets ANSI Z89.1-2014 Type 2 Class C standards for lightweight, breathable head protection without electrical insulation. It is also compliant with EN12492, OSHA 1910, and OSHA 1926 regulations to keep your crew fully protected and jobsite ready. Crafted from a durable ABS shell, the APEX Safety Helmet is designed for strength and performance. The 6-point suspension system and comfort-adjustable headband ensure a secure, customized fit for head sizes 6 ½ to 8, while the adjustable, removable 4-point chin strap keeps the helmet firmly in place during falls or sudden movements. Strong lamp clips and a tab to hold headlamps securely in place, and a special loop on the chin strap enables easy connection to a harness. Equipped with WaveOn Technology, the helmet allows instant access to manuals, certifications, and inspection records with a simple tap—streamlining compliance and improving efficiency. Available in Black, White, Grey, Blue, Red, Yellow, and Orange, the APEX Type 2 Safety Helmet blends rugged durability with professional style. At Malta Dynamics, we also offer custom logo printing, so you can outfit your crew with helmets that showcase your company’s identity while delivering premium protection. Field Tested. Field Approved. Trusted by real crews working in real-world conditions. Product Downloads: Helmet Manual Helmet Spec Sheet Helmet Declaration of Conformity Clear Visor Declaration of Conformity Tinted Visor Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]$69.99 Select options This product has multiple variants. The options may be chosen on the product page -
HIGH VISIBILITY YELLOW FIELD VEST
SKU: VARIOUS. High visibility safety vests are a required necessity in many of today’s work environments. Whether you are on construction sites, in hazardous working areas, or along the roadsides across the country, there are plenty of distractions that draw attention away from your presence – placing you in harm’s way. The attention of drivers, machine operators, or even your co-workers can be the difference between a safe work environment and a dangerous one. The Malta Dynamics Hi-Vis Safety Field Vest improves your ability to be seen with our vibrant, highly visible colors and contrasting reflective stripes. Our vest is ANSI compliant and is suitable for use during the daytime as well as in low light conditions. The breathable yet durable design makes it easy to wear, even in the hottest, harshest conditions. The zipper closure allows for easy on/off. The Malta Dynamics Hi-Vis Safety Field Vest is an economical option for use in seaports, airports, and roadways. It’s perfect for baggage handling, construction, demolition work, emergency and First Responders, landscaping, paving and road crews, police and traffic control, railroad, sanitation, security, surveyor and TSA. Product Downloads: Safety Vest Spec Sheet V1501 Declaration of Conformity V1502 Declaration of Conformity V1503 Declaration of Conformity V1504 Declaration of Conformity V1505 Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]$7.99 Select options This product has multiple variants. The options may be chosen on the product page -
HUNTER’S ELITE HARNESS KIT
SKU: VARIOUS. Since 2015, Malta Dynamics has supplied top-quality workplace safety gear directly to users. With over 600 field employees, we prioritize their needs, testing products extensively to make them meet real-world demands. This commitment has made us a leading name in safety, known for our expertly tested and approved products. Specializing in working safely at heights, our team, many of whom are hunters, combined expertise, and passion to create the ultimate hunter safety system. Unlike typical options, our full-body safety harnesses are designed for durability, comfort, and lightweight performance, which is ideal for all-day hunts in any weather. Our full body Hunter’s Elite harness starts with our Elite Series safety gear, modified for silence. Breathable padding keeps you dry, while quick-connect attachments ensure fast and easy use. Equipped with MOLLE webbing and various attachment points, our Hunter’s Elite harness offers hands-free access to essential gear. Every Hunter’s Elite harness kit includes a Tree Strap and a versatile Deer Drag/Suspension Relief Strap. Tested to ASTM F2123-19 standards, the Hunter’s Elite harness supports hunters up to 350 lbs. Adjustment Capabilities A full-body harness is only as good as its fit, and the Hunter Elite Harness Kit delivers full adjustability to keep you secure at any height. The stretch shock-absorbing tether provides controlled movement with an adjustable tether length, while the quick-connect steel buckles ensure a fast and secure setup. Designed to fit any size, this harness allows for a customized fit, ensuring comfort and safety throughout the hunting season. Enhance Safety with Accessories We’ve equipped this enclosed harness with essential features to keep you protected in the field. Designed and tested for any tree stand hunting height, this system is more than just a harness—it’s a complete safety arrest system for the hunting season. Pair the Hunter Elite Harness Kit with gear like the Dual-Action Twist Lock Carabiner or the 30’ Reflective Lifeline Benefits Exceptional Protection Engineered for Maximum Safety – Built with steel quick-connect buckles and high-quality webbing securing you at any height. ASTM F2123-19 Certified – Meets industry safety standards for harness system reliability. Stretch Shock-Absorbing Tether – Reduces impact force during a free fall, adding an extra layer of protection. Comfort & Fit Full-Body Padding – Strategically placed padding on the shoulders, back, waist, and legs keeps you comfortable for extended periods. Adjustable Design – Fits individuals of all sizes, ensuring a secure and snug fit. Durability – Made from durable nylon and polyester, providing all-day wearability without weighing you down. Durable and Reliable Construction TrueTimber® Camo Options – Available in Kanati and Strata patterns, as well as, Black Gear-Ready – MOLLE webbing allowing for custom gear attachment or personalized layout Product Downloads: HUNTER'S ELITE HARNESS MANUAL HUNTER'S ELITE HARNESS SPEC SHEET DECLARATION OF CONFORMITY [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]$119.99 Select options This product has multiple variants. The options may be chosen on the product page -
ULTRALIGHT HARNESS KIT
SKU: VARIOUS. The Malta Hunting Safety Ultralight harness combines modern design with top-notch safety features. It's crafted with breathable padding on the back, shoulders, and legs, durable 1" webbing, and aluminum quick-connect buckles. Designed for hunters, it includes webbing for gear attachment points and clips for hands-free equipment access. Every Ultralight harness kit includes a Tree Strap and a versatile Deer Drag/Suspension Relief Strap. Meeting ASTM F2123-19 standards and supporting up to 300 lbs, the Ultralight reflects our dedication to safety and craftsmanship since 2015. Elevate your hunting experience with superior protection and convenience. Product Downloads: ULTRALIGHT HARNESS MANUAL ULTRALIGHT HARNESS SPEC SHEET DECLARATION OF CONFORMITY [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]$109.99 Select options This product has multiple variants. The options may be chosen on the product page -
SUSPENSION TRAUMA RELIEF STRAP
SKU: R0005. Arresting an accidental fall is just the first step to making sure that a worker is safely rescued. A planned and swift rescue is vital to save someone who is hanging by their harness. In the time that it takes to retrieve the fallen worker, numerous secondary complications and injuries can occur. While suspended, the femoral arteries of the worker, which are located on the inner thigh, are vulnerable to excess pressure. The Malta Dynamics Harness Trauma Relief Strap quickly unravels to create a bridge under the feet of the suspended worker, which can then be used to stand up in the harness to relieve pressure from the rest of the body. The bridged design of the suspension strap allows the worker to relieve pressure by standing up with both feet on the strap, or one at a time. The wide design of the fall protection trauma strap is designed to easily fit into the heel of a work boot to provide a sturdier surface to stand on. The suspension straps are equipped with quick connect buckles and can be adjusted and pre-set to the appropriate height of the worker, so that if an accident occurs, everything is already prepared for deployment and safety. A suspension trauma strap does not hinder the activity of a worker, in fact, the lightweight and easy-to-use accessory stays clipped and stowed on each hip of the harness and can be deployed to create a suspension relief strap to stand up on while awaiting rescue. During a rescue every second counts, and the addition of suspension trauma straps for fall protection can provide extra minutes of rescue time before circulatory complications occur. Medical experts agree that safety harness trauma straps provide a needed redirection of pressure on the body while someone is suspended. Without trauma straps, blood can be restricted to the brain and other organs that could result in unconsciousness and even death if not rescued promptly. Suspension trauma relief straps for fall protection are a low cost item that can and should be added to any harness. Product Downloads: Trauma Relief Strap Manual Trauma Relief Strap Spec Sheet Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget] -
WARTHOG COMFORT MAXX BELTED SIDE D-RING HARNESS
SKU: B2200 Series. Working in heavy-duty trades or from elevated heights puts workers at risk because slips can easily lead to serious injuries or casualties. Because falls are common in these types of environments, fall protection is needed to keep your workers safe and your business compliant. Specifically, safety harnesses — which are just one part of a fall protection system — help reduce the impact of a fall and keep workers upright and elevated. Malta Dynamics carries a range of personal fall arrest protection made from only premium materials. The Warthog® MAXX “Comfort” Construction Harness with Removable Belt, Side D-Rings and Additional Padding combines 100% safety compliance with the ultimate in comfort — padding on the shoulders, back, waist and upper thigh. This Class 3 full-body harness is adaptable and can fit a wide range of applications, including rescue, travel restraint and positioning. The Warthog Comfort MAXX Harnesses can be used in all kinds of fall protection applications where wearing a harness for long periods is a must. With the quick connect buckles on the chest and tongue buckle legs, your workers can easily adjust the Warthog Comfort MAXX D-Ring Harness and achieve the perfect fit with no slippage. All of our harnesses come complete with a built-in impact indicator, making it easy to inspect your harness for signs of a fall before each use. Like all of our harnesses, the Warthog Comfort MAXX Harness meets all applicable ANSI and OSHA standards. As an added benefit, most of our harnesses do more than just meet these standards — they exceed them. We design and test them to ensure your workers will be supported and comfortable even when they need to wear the belted harness for extended periods. User Instructions: How to Adjust the Warthog MAXX D-Ring Harness and Achieve the Right Fit Having the right personal fall arrest protection is key to making sure your workers stay safe when working from elevated heights or in heavy-duty trades. Ensuring the harness fits correctly and proper terms of use are followed is just as important, allowing the safety features to work properly. With every construction project your business takes on, here’s how you can make sure your harnesses are adjusted and fit as they should: Holding the D-Ring shake the Comfort MAXX safety harness and then unfasten any straps. Put the straps over your shoulders while making sure the D-Ring centers on your back. Put each leg through the leg straps, ensuring all connectors stay snug. Secure the waist belt, keeping it snug as well. Connect the harness’s chest strap so it remains 6 to 8 inches below your throat. Keep Your Job Site Safe and Compliant With Malta Dynamics' Exceptional Craftsmanship With over three decades of experience in the construction industry, Malta Dynamics is your go-to manufacturer for belted harnesses with D-Rings. We are a full-service manufacturing company that designs, engineers and manufactures a wide range of occupational products, and unlike other businesses, we use our own equipment. We have firsthand experience from tackling countless workplace challenges over the years, and we understand what safety and comfort features you look for in a harness. The result? We are now proud to offer some of the most trusted fall protection and safety harness equipment available on the market. If you have any questions about our Warthog Comfort MAXX Belted Side D-Ring Harness, our team is here to help. Fill out our form or speak to a representative at 800-494-1840. Product Downloads: Harness Selection Guide Harness Manual *Technical Bulletin *Test Report Harness Spec Sheet Declaration of Conformity Harness Inspection Form [caption id="attachment_46537" align="aligncenter" width="1920"] Harness Label Graphic[/caption] [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]Original price was: $147.99.$99.99Current price is: $99.99. Select options This product has multiple variants. The options may be chosen on the product page -
HIGH VISIBILITY YELLOW SAFETY SURVEYOR VEST
SKU: VARIOUS. High visibility safety vests are a required necessity in many of today’s work environments. Whether you are on construction sites, in hazardous working areas, or along the roadsides across the country, there are plenty of distractions that draw attention away from your presence – placing you in harm’s way. The attention of drivers, machine operators, or even your co-workers can be the difference between a safe work environment and a dangerous one. The Malta Dynamics Hi-Vis Safety Surveyor Vest improves your ability to be seen with our vibrant, highly visible colors and contrasting reflective stripes. Our vest is ANSI compliant and is suitable for use during the daytime as well as in low light conditions. The breathable yet durable design makes it easy to wear, even in the hottest, harshest conditions. The zipper closure allows for easy on/off and 7 thoughtfully placed pockets ensure that everything you need is with you at all times. There are even mic tabs for easy, hands free communication. The Malta Dynamics Hi-Vis Safety Surveyor Vest is an economical option for use in seaports, airports, and roadways. It’s perfect for baggage handling, construction, demolition work, emergency and First Responders, landscaping, paving and road crews, police and traffic control, railroad, sanitation, security, surveyor and TSA. Product Downloads: Safety Vest Spec Sheet PPE-006 Declaration of Conformity PPE-007 Declaration of Conformity PPE-008 Declaration of Conformity PPE-009 Declaration of Conformity PPE-010 Declaration of Conformity PPE-0011 Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]Price range: $3.00 through $12.99 Select options This product has multiple variants. The options may be chosen on the product page -
WARTHOG® TONGUE AND BUCKLE FULL-BODY HARNESS (WITH X-PAD)
SKU: B2000-X Family. Keeping your workers safe and protected on the job site should be a top priority. Any time construction work involves heights, having protective, compliant equipment is all the more important. This is because falls are one of the leading causes of serious injury and death on construction sites where workers perform jobs on elevated surfaces like rooftops. At Malta Dynamics, we carry an array of full-body harnesses with buckles that help prevent falls from becoming casualties. Because these harnesses support workers and can function with both self-retracting lifelines or shock-absorbing lanyards, you can feel confident knowing your contractors will be fully protected day in and day out. For ultimate comfort, the Malta Dynamics Warthog Full-Body Harness comes with the special X-Pad as a standard accessory. The X-Pad Back Pad is a great comfort accessory for your harness, enhancing worker satisfaction, productivity and compliance. It is the “preferred” harness for Malta Dynamics’ sister company Lang Masonry and Restoration. The innovative design provides extra comfort throughout the neck, shoulders and back. The one-piece design eliminates shoulder pad slippage — shoulder pads stay in place and will not slide off. The padding redistributes weight, keeping the pressure off even when using a tool belt. The worker needs to be as comfortable as possible while on the job site, and the B2002-X makes it easier to keep working productively while remaining safe on the job. (Various Sizes Available) Along with being the only accepted form of personal fall arrest protection you can use, this harness, which features a crotch strap with a buckle and tongues, meets the American National Standards Institute (ANSI) and Occupational Safety and Health Administration (OSHA) standards. We take pride in meeting and exceeding these guidelines to help you prevent workplace accidents. With customization options available, the Warthog Full-Body Harness will surely be your workers' new go-to safety equipment. Experience unbeatable protection and comfort with this cutting-edge design. How to Achieve the Perfect Fit Once you've obtained the full-body harness with quick disconnect buckles, achieving the perfect fit is just as important. Ensuring the harness fits correctly helps protect your workers and keep them safe if they do fall on the site. To make sure the harness will work as it should, be sure to: Holding the D-Ring, shake the Warthog safety harness and then unfasten any straps. Put the harness straps over your shoulders, ensuring the D-Ring stays centered on your back. Put each leg through the leg straps one at a time, snuggly attaching the straps to the connector. Secure the waist belt if your harness has one. Fasten the chest strap, keeping it around 6 to 8 inches under your throat. Keep Your Workers Safe and Compliant With Malta Dynamics Getting the Warthog full-body harness with tongue buckle legs from Malta Dynamics means you'll be partnering with a full-service manufacturing company. Unlike other companies, we take pride in using our safety harnesses instead of only designing, engineering and manufacturing them for our customers. Our team has over three decades of experience in the construction industry. Because we specialize in fall protection solutions, you can trust we'll deliver efficient, durable and affordable products every time. All our harnesses can withstand tough challenges, no matter what industry you are in. At Malta Dynamics, we do more than just provide businesses with comfortable, safe and compliant equipment. We also back up each harness we sell with a 100% satisfaction guarantee and Declarations of Conformity for every product. Have any questions or interested in learning more about our full-body harnesses? Call us at 800-494-1840 or fill out our online contact form — we'll get in touch with you as soon as possible. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]Price range: $54.99 through $85.99 Select options This product has multiple variants. The options may be chosen on the product page -
APEX Indoor/Outdoor Safety Glasses
SKU: VARIOUS. Working on dangerous jobsites day after day is a tough task, and your eyes should be on the top of your prioritized safety list. You’ll need safety glasses that are designed for reliable lasting use, time after time. The Malta Dynamics APEX Safety Glasses are a top selling style featuring a sleek and sporty look while maintaining maximum safety and comfort. The APEX safety glasses aren’t just the best construction safety glasses, they are suitable for almost any worksite in any condition. They feature a durable anti-scratch coating to make them rugged enough to stand up to your toughest work environments. The anti-fog lenses are perfect for a crystal clear view in cold or warm climates. You can wear these APEX work safety glasses with confidence knowing that they have been put through rigorous testing to meet the ANSI/ISEA Z87.1-2020 impact standard. The APEX safety glasses feature a durable and lightweight singular top rim that stylishly contours with the lenses to the shape of the head and face to provide superior protection and a comfortably snug fit. The lenses are easy to keep clean with soap and water, so they are ready for continued crystal clear use in a variety of work settings. The soft, pliable temples and molded nose bridge make for a universally comfortable, non-slip fit for most head shapes. The fit provides a secure feeling without putting too much pressure on your head to make them suitable for all day wear. The lightweight and comfortable style of these glasses provides enough space to wear them with or without prescription glasses underneath. The Malta Dynamics APEX Safety Glasses are a reliable and cost-effective eye protection solution for applications like medical, lab work, chemistry, woodworking, mechanics, construction and more. Product Downloads: Glasses Spec Sheet Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]Price range: $4.49 through $36.51 Select options This product has multiple variants. The options may be chosen on the product page -
APEX Tinted Safety Glasses
SKU: VARIOUS. Need for Safety Glasses You work every day, and so should your eye protection! Whatever your work environment holds, whether it be a construction site or another outdoor environment, you’ll need safety glasses designed for lasting use and high-velocity impact, time after time. Perfect for all sunny conditions, the Malta Dynamics APEX tinted Safety Glasses feature a sleek and sporty style while maintaining maximum protection, clear vision, safety, and comfort, even in intense sunlight. Features Protective Lenses Our protective eyewear features scratch-resistant lenses to make them rugged enough to stand up to your toughest outdoor environments and job sites. Additionally, the permanent anti-fog coating and glare reduction allow for consistent optical clarity during outdoor activities. Because of their grey tint lens color, these APEX safety glasses are more effective than most sunglasses, boasting 99.9% UV protection for all light conditions. Easy to keep clean with soap and water, they are ready for superior protection in any work setting. Impact Resistant Design The APEX Safety Glasses provide excellent protection, allowing you to wear these APEX glasses with confidence. Because they have been through rigorous testing, they meet the ANSI/ISEA Z87.1-2020 impact resistance standards. Our APEX safety glasses feature a durable and lightweight top rim that smoothly contours your head and face. Additionally, their curved lenses provide optimal protection and a comfortably secure fit. Comfortable Fit Along with the top rim of these glasses, the soft, pliable temples and molded nose piece give these safety glasses a universally comfortable, non-slip fit for almost every head shape. Suitable for all-day wear, they provide a secure feeling without putting too much pressure on your head. These high-quality safety glasses even allow enough space to wear them with prescription glasses underneath. The Malta Dynamics APEX Safety Glasses are a reliable and cost-effective eye protection solution for jobs in any industry including medical, lab work, woodworking, mechanics, running, construction, and more. Say goodbye to eye strain and UV light glare! Order your pair of safety glasses today and receive free shipping! Alternative Options Do you work inside or in overcast conditions on cloudy days? Safety Eyewear is still necessary to prevent eye injuries according to ANSI Standards. Try our APEX Glasses with clear lenses and indoor/outdoor APEX Glasses, allowing for the highest visual clarity on your site. Product Downloads: Glasses Spec Sheet Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]Price range: $4.49 through $37.34 Select options This product has multiple variants. The options may be chosen on the product page -
30′ REFLECTIVE LIFELINES
SKU: HEA400x-Family. The Malta Hunting Safety 30’ Reflective Lifeline offers enhanced visibility with its reflective material, making your stand easily identifiable in low-light conditions for increased safety during hunting. With a versatile length that accommodates tree stands up to 25 feet, it provides ample reach and flexibility for various hunting setups and locations. Equipped with our secure Dual-Action Twist Lock Carabiner, the Lifeline ensures a reliable attachment and maintains a safe connection throughout the hunt. The pre-installed prusik knot makes setup convenient and quick, saving valuable hunting time. Once properly installed, the Lifeline keeps the hunter connected from the ground to the stand and back again, ensuring continuous fall protection throughout the hunt. Product Downloads: REFLECTIVE LIFELINE MANUAL REFLECTIVE LIFELINE SPEC SHEET DECLARATION OF CONFORMITY [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]Price range: $27.99 through $199.99 Select options This product has multiple variants. The options may be chosen on the product page -
HIGH STRENGTH STEEL LOCKING CARABINER
SKU: C1000. The Malta Dynamics High Strength Steel Locking Carabiner is designed to be durable and easy to use. Its ANSI-tested gate is certified to withstand loads up to 3,600 pounds. This carabiner is self-closing and self-locking and can be opened with just one hand. Key Features: ● Meets ANSI Z359.12-2009 and ANSI A10.32-12 ● OSHA Compliant ● Product Weight: 0.58 lbs. ● Heavy Duty ● Easy to use one hand operation ● Offer maximum strength to 5,000 pounds ● 3600 lb. (16kN) Gate ● Securely attach lanyards or lifelines to anchorages ● 1” x 4-7/8” x 3-1/8” x 1” Gate Opening Connector Manual Connector Spec Sheet Declaration of Conformity [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
