SKU: A6320/21 Family. The Malta Dynamics Roof Anchor is a fixed-post anchorage solution designed for permanent installation on steel, wood, or concrete rooftops. Available in both 12” and 18” heights, this anchor extends above the finished roof surface to provide a visible, accessible tie-off point-ideal for both new construction and ongoing maintenance work.
Choose the 12” model for standard roof setups, or select the 18” option when working with deeper roof substrates that require additional clearance above flashing, insulation, or decking layers. Both versions are constructed from heavy-duty galvanized steel for long-lasting performance and corrosion resistance in tough weather conditions.
The round post design fits most standard flashing kits, ensuring a clean, secure install. Each anchor is rated to a 5,000 lb. minimum breaking strength and is fully compliant with ANSI Z359.18-2017, OSHA 1926 Subpart M, and OSHA 1910 standards.
Compatible with self-retracting lifelines (SRLs), vertical lifelines, and shock-absorbing lanyards, the Malta Dynamics Roof Anchor also meets window cleaning system requirements—making it a dependable solution for a wide range of elevated work applications.
Manual
Spec Sheet
DoC 12"
DoC 18"
$199.99 – $219.99Select options
This product has multiple variants. The options may be chosen on the product page
SKU: A7320-A6306. The Malta Dynamics Threaded Top 18" Roof Anchor is a fixed post rooftop anchor, intended for permanent applications only. The A6306 has been thoroughly tested (see testing and compliance page on this product) and is compatible for installation on steel and concrete substrates (fasteners sold separately). The 18-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6306 roof safety anchor is composed of durable galvanized steel, and is compatible for use with SRLs, vertical lifelines, and shock absorbing lanyards.
The Malta Dynamics 5K Swivel Anchor rotates 360 degrees, flips 180 degrees, and is zinc coated steel. Mounting hardware included.
Meets ANSI Z359.18-2017 and ANSI A10.32-12
Compliant with OSHA 1910 and OSHA 1926 Subpart M
Product Weight: 1.5 lbs.
Simple mount and bolt on system
Easy installation and removal
Swivels full 360°
Great for first-man-up system
Worker Capacity Range: 130-310 lbs.
Material: Zinc plated steel
Min. Breaking Strength: 5,000 lbs.
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
SKU: A6306. The Malta Dynamics Threaded Top 18" Roof Anchor is a fixed post rooftop anchor, intended for permanent applications only. The A6306 has been thoroughly tested (see testing and compliance page on this product) and is compatible for installation on steel and concrete substrates (fasteners sold separately). The 18-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6306 roof safety anchor is composed of durable galvanized steel, and is compatible for use with SRLs, vertical lifelines, and shock absorbing lanyards.
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
SKU: A6301. The Malta Dynamics A6301 - Roof Anchor 18" Standard, Made In USA. is a fixed post roof top anchor, intended for permanent applications only. The A6301 has been thoroughly tested (see testing and compliance page on this product) and is compatible for installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 18-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6301 roof anchor is composed of durable galvanized steel, and is compatible for use with SRLs, vertical lifelines, and shock absorbing lanyards.
Proud to buy American? Prefer the quality? Maybe you're encouraged to source locally? Either way, this Malta Dynamics Roof Anchor's got your back!
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
SKU: A7320-A6305. The Malta Dynamics Threaded Top 12" Roof Anchor is a fixed post roof top safety anchor, intended for permanent applications only. The A6305 has been thoroughly tested (see testing and compliance page on this product) and is compatible for installation on steel and concrete substrates (fasteners sold separately). The 12-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6305 permanent roof anchor is composed of durable galvanized steel, and is compatible for use with SRLs, vertical lifelines, and shock absorbing lanyards.
The Malta Dynamics 5K Swivel Anchor rotates 360 degrees, flips 180 degrees, and is zinc coated steel. Mounting hardware included.
Meets ANSI Z359.18-2017 and ANSI A10.32-12
Compliant with OSHA 1910 and OSHA 1926 Subpart M
Product Weight: 1.5 lbs.
Simple mount and bolt on system
Easy installation and removal
Swivels full 360°
Great for first-man-up system
Worker Capacity Range: 130-310 lbs.
Material: Zinc plated steel
Min. Breaking Strength: 5,000 lbs.
Anchor Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
Swivel Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
SKU: A6305. The Malta Dynamics Threaded Top 12" Roof Anchor is a fixed post roof top safety anchor, intended for permanent applications only. The A6305 has been thoroughly tested (see testing and compliance page on this product) and is compatible for installation on steel and concrete substrates (fasteners sold separately). The 12-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6305 permanent roof anchor is composed of durable galvanized steel, and is compatible for use with SRLs, vertical lifelines, and shock absorbing lanyards.
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
$79.99Original price was: $79.99.$69.99Current price is: $69.99.Read more
SKU: A6300. The Malta Dynamics A6300 - Roof Anchor 12" Standard is a fixed post roof anchor, intended for permanent applications only. The A6300 has been thoroughly tested and is compatible for installation on steel and concrete substrates (fasteners sold separately). Meets the requirements for anchors rated for window cleaning. The 12-inch anchor post functions to extend through roofing materials so that it is accessible both during and after roof construction. The A6300 roof anchor is composed of durable galvanized steel, and is compatible for use with SRLs, vertical lifelines, and shock absorbing lanyards.
Proud to buy American? Prefer the quality? Maybe you're encouraged to source locally? Either way, this Malta Dynamics Roof Anchor's got your back!
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
SKU: VARIOUS. A permanent roof anchor is a significant part of Personal Fall Arrest Systems (PFAS) and Fall Restraint Systems used while working on roofs. When attached to the ridge of a wooden roof and used with compatible safety systems, this safety anchor helps limit the forces associated with fall arrest. It was built to be used with other components of a PFAS that limit maximum arrest forces to 900 lbs. or less.
Designed for wood rooftops and permanent applications, the Malta Dynamics roof safety anchors have two D-Ring ends made from top-quality metal (alloy steel) and an 18″ stainless steel body for an exceptionally long life. Like all products at Malta Dynamics, the Permanent Roof Anchor is entirely compliant with all applicable ANSI and OSHA regulations. The Permanent Anchor is designed for ease of installation and built to withstand the toughest environments, ideal for both residential maintenance and construction work.
The tensile breaking strength of this rugged stainless steel roof anchor is a minimum of 5,000 lbs. (22.2 kN) in ANSI testing. Even with such powerful capabilities, it weighs just under 1 lb. and features a sleek, discreet appearance. Its unique pre-drilled hole layout also helps minimize truss damage that could occur during installation. Fasteners (nails) are included, too, so you can be confident in the installation.
Using these permanent roof anchors alongside the right safety harness can help you create safer, easier fall protection for your team. Browse our selection of harnesses and harness accessories for high-quality equipment from the industry leaders at Malta Dynamics.
How to Install a Permanent Roof Anchor
Permanent roof anchor installation is straightforward with this Malta Dynamics fall protection anchor. You can spend less time installing and more time getting to work. Before installing the safety anchor, carefully inspect it, along with the roof’s trusses, rafters, and structural members. You’ll need to ensure the roof is structurally sound and that the permanent roof anchor is not damaged in any way. You will also need to select a site that meets OSHA requirements, including minimized swing fall hazards and a limited free-fall distance of less than 6 feet.
All employees must be trained by a Competent Person, as defined by OSHA. Explore our training options if your team needs a refresher on fall protection awareness.
Permanent roof anchor installation instructions are as follows:
Ensure you are working on a roof constructed of wood, the permanent roof anchor is not designed for metal roof materials.
Remove 1-2 pieces of the ridge cap if installing on residential roofing with asphalt shingles, shakes, or tile.
Center the anchorage device on the ridge of the framing assembly and position it so the nail holes on the center of the legs are directly centered with the middle of the roof framing member.
Use 16d common nails to secure the bracket with all provided nail holes. No nails should split the timber or protrude through the side of the members
These steps are a brief overview of the installation procedures required for this permanent roof anchor for fall protection — see the manual for more comprehensive instructions and use guidelines.
The Malta Dynamics Difference
Malta Dynamics specializes in quality fall protection systems and is a trusted industry leader providing safety equipment throughout the nation. We are a full-service manufacturer that takes care of design, engineering, and manufacturing for fall protection products across many different industries. Our equipment exceeds OSHA requirements and is built in an ISO-17025 laboratory that uses ANSI testing procedures for reliable manufacturing practices. We emphasize the use of high-strength materials engineered for durability and long-term performance. Put safety first with a permanent roof anchor that’s designed for the task and meets OSHA standards.
If you have any questions about the Malta Dynamics Permanent Roof Anchor, please reach out to us online or at (800) 494-1840!
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
$25.99Select options
This product has multiple variants. The options may be chosen on the product page
SKU: A6303. The Personal Fall Arrest Systems (PFAS) and Fall Restraint Systems used while working at heights usually include fall arrest roof anchors. The Malta Dynamics Reusable Roof Anchor is a 21” reusable heavy-duty roof anchor with two moveable legs and a steel D-Ring. These fall arrest roof anchors weigh only 2.4 lbs. and are designed with a discreet profile that’s easy to transport. This reusable roof fall protection anchor is designed for temporary use on wood rooftops and fits a range of roof pitches from flat to 12/12. The thick zinc plated steel construction gives this reusable roof anchor system a long life and is ideal for supporting workers ranging from 130-310 lbs.
Instructions on how to install a reusable roof anchor are easy to follow. Simply use the pre-drilled holes in the legs as a guide for installation and secure the anchor to the rooftop using screws or the included nail fasteners. This roof fall protection anchor meets or exceeds the safety-oriented requirements of OSHA and ANSI. It meets OSHA 1910, OSHA 1926 Subpart M, ANSI Z359.18-2017 Type A, and ANSI A10.32-12.
Using these permanent roof anchors alongside the right safety harness can help you create safer, easier fall protection for your team. Browse our selection of harnesses and harness accessories for high-quality equipment from the industry leaders at Malta Dynamics.
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
SKU: A6318. Malta Dynamics Single Use Roof Anchor
The Malta Dynamics Single Use Roof Anchor is a must-have for any roofer’s safety kit. Designed to bend easily over the roof peak or adjust to match varying roof pitches, this disposable anchor provides a secure tie-off point without causing permanent damage to the structure. Its versatile shape and reliable performance make it ideal for new construction, remodeling, or reroofing projects.
Built from durable zinc-plated alloy steel, this anchor is both lightweight and strong. It installs quickly using the included (8) 16d common nails, making setup fast and hassle-free. With a user weight capacity of 130–310 lbs., this anchor has a minimum breaking strength of 5,000 lbs. and is tested to meet OSHA 1926.502, OSHA 1910.66, and ANSI Z359.18-2017 standards.
To ensure maximum safety, always mount the anchor into a solid structural member such as a roof truss or rafter. A fall protection system is only as strong as its anchorage point.
Whether you're tackling a residential remodel, or a commercial reroof, this single-use roof anchor helps you get the job done efficiently and safely.
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
SKU: A6304. The Malta Dynamics Multi-Directional Roof Anchor supports one worker in fall arrest or two workers in fall restraint. The four directional connection points increase the working range (when detaching and reattaching to connection points). Workers can maintain both fall arrest or fall restraint.
It is designed and tested to meet the latest ANSI Z359.18-2017 standard, ensuring optimal safety and performance for workers. This anchor supports one worker in fall arrest and two workers in fall restraint, featuring four directional connection points that enhance mobility and ease of use. Its versatile design allows workers to safely detach and reattach to connection points while maintaining fall protection, making it an ideal solution for various roofing applications.
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
SKU: A6316. Does your jobsite feature a flat roof surrounded by a parapet wall? If it does, then you need a way to anchor your self-retracting lifelines (SRLs). At Malta Dynamics, our parapet clamp system allows you to put your SRL in place with a sturdy connection that helps support weight and keep your workers safe. The reusable device is easy to install and won't cause damage to the wall. Your workers can use our parapet anchor on walls varying in thickness from 2.36" to 14.1".
On a jobsite, time is critical, but you never want to compromise your workers' safety. Equipment that offers intuitive usage is the best type to have on your site, as it cuts back on time without putting your employees in danger. It takes just a minute or two to secure the parapet clamp, and your workers can adjust it to reposition around the worksite.
You can feel confident in the sturdiness of our design. Our temporary parapet edge protection provides a practical solution in areas where you otherwise couldn't use an SRL.
Put Safety First When You Use Our Parapet Grabber
The anchor comes with specific directions for installation and application. Ensure your workers read and understand the instructions, as their safety depends on using the parapet clamp correctly. For example, you need a minimum wall height of 9' to use our parapet anchor.
Instructions for Installation of Parapet Clamp Fall Protection
The Parapet Anchor is intended to be installed on a parapet wall up to 14.1 inches (360mm) thick.
Unscrew the set screws so the points do not protrude into the anchor slot.
Remove the detent pin and move the adjustable arm back far enough to allow the clamp to fit over the parapet wall.
Make sure the top surface within the anchor slot is fully seated on the parapet wall.
Slide the adjustable arm toward the parapet wall and reinsert the locking pin through the position setting holes.
Tighten each set screw until it makes contact with the parapet wall. Hand tighten the screws until snug. Excessive torque can damage the parapet wall or the parapet wall anchor.
Remain in Compliance With Products From Malta Dynamics
Malta Dynamics has extensive experience manufacturing the products you need to protect your workers on the jobsite. We design our equipment with you in mind. Everything we make is easy and intuitive to use. We also consider the comfort of your employees throughout our engineering and manufacturing process.
All of our equipment is OSHA compliant, and we study federal and local guidelines to ensure you meet the necessary requirements. If you need equipment to anchor your SRLs, you can order our parapet anchor today. For more information, call us at 800-494-1840 or fill out our online contact form.
Product Downloads:
Anchor Manual
Anchor Spec Sheet
Declaration of Conformity
[ryviu_question_and_answer]
[ryviu_widget_total]
[ryviu_widget]
