Full Body Harness | Fall Protection Harnesses | Fall-Arrest

Showing 1–12 of 14 resultsSorted by popularity

Show

Rated 4.69 out of 5
(106)

WARTHOG COMFORT MAXX BELTED SIDE D-RING HARNESS
SKU: VARIOUS. Working in heavy-duty trades or from elevated heights puts workers at risk because slips can easily lead to serious injuries or casualties. Because falls are common in these types of environments, fall protection is needed to keep your workers safe and your business compliant. Specifically, safety harnesses — which are just one part of a fall protection system — help reduce the impact of a fall and keep workers upright and elevated. Malta Dynamics carries a range of personal fall arrest protection made from only premium materials. The Warthog® MAXX “Comfort” Construction Harness with Removable Belt, Side D-Rings and Additional Padding combines 100% safety compliance with the ultimate in comfort — padding on the shoulders, back, waist and upper thigh. This Class 3 full-body harness is adaptable and can fit a wide range of applications, including rescue, travel restraint and positioning. The Warthog Comfort MAXX Harnesses can be used in all kinds of fall protection applications where wearing a harness for long periods is a must. With the quick connect buckles on the chest and tongue buckle legs, your workers can easily adjust the Warthog Comfort MAXX D-Ring Harness and achieve the perfect fit with no slippage. All of our harnesses come complete with a built-in impact indicator, making it easy to inspect your harness for signs of a fall before each use. Like all of our harnesses, the Warthog Comfort MAXX Harness meets all applicable ANSI and OSHA standards. As an added benefit, most of our harnesses do more than just meet these standards — they exceed them. We design and test them to ensure your workers will be supported and comfortable even when they need to wear the belted harness for extended periods. User Instructions: How to Adjust the Warthog MAXX D-Ring Harness and Achieve the Right Fit Having the right personal fall arrest protection is key to making sure your workers stay safe when working from elevated heights or in heavy-duty trades. Ensuring the harness fits correctly and proper terms of use are followed is just as important, allowing the safety features to work properly. With every construction project your business takes on, here’s how you can make sure your harnesses are adjusted and fit as they should: Holding the D-Ring shake the Comfort MAXX safety harness and then unfasten any straps. Put the straps over your shoulders while making sure the D-Ring centers on your back. Put each leg through the leg straps, ensuring all connectors stay snug. Secure the waist belt, keeping it snug as well. Connect the harness’s chest strap so it remains 6 to 8 inches below your throat. Keep Your Job Site Safe and Compliant With Malta Dynamics' Exceptional Craftsmanship With over three decades of experience in the construction industry, Malta Dynamics is your go-to manufacturer for belted harnesses with D-Rings. We are a full-service manufacturing company that designs, engineers and manufactures a wide range of occupational products, and unlike other businesses, we use our own equipment. We have firsthand experience from tackling countless workplace challenges over the years, and we understand what safety and comfort features you look for in a harness. The result? We are now proud to offer some of the most trusted fall protection and safety harness equipment available on the market. If you have any questions about our Warthog Comfort MAXX Belted Side D-Ring Harness, our team is here to help. Fill out our form or speak to a representative at 800-494-1840. Product Downloads: Harness Selection Guide Harness Manual *Technical Bulletin *Test Report Harness Spec Sheet Declaration of Conformity Harness Inspection Form [caption id="attachment_46537" align="aligncenter" width="1920"] Harness Label Graphic[/caption] [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$147.99 Select options This product has multiple variants. The options may be chosen on the product page
Rated 4.57 out of 5
(95)

WARTHOG® TONGUE AND BUCKLE FULL-BODY HARNESS (WITH X-PAD)
SKU: B2002-X. Keeping your workers safe and protected on the job site should be a top priority. Any time construction work involves heights, having protective, compliant equipment is all the more important. This is because falls are one of the leading causes of serious injury and death on construction sites where workers perform jobs on elevated surfaces like rooftops. At Malta Dynamics, we carry an array of full-body harnesses with buckles that help prevent falls from becoming casualties. Because these harnesses support workers and can function with both self-retracting lifelines or shock-absorbing lanyards, you can feel confident knowing your contractors will be fully protected day in and day out. For ultimate comfort, the Malta Dynamics Warthog Full-Body Harness comes with the special X-Pad as a standard accessory. The X-Pad Back Pad is a great comfort accessory for your harness, enhancing worker satisfaction, productivity and compliance. It is the “preferred” harness for Malta Dynamics’ sister company Lang Masonry and Restoration. The innovative design provides extra comfort throughout the neck, shoulders and back. The one-piece design eliminates shoulder pad slippage — shoulder pads stay in place and will not slide off. The padding redistributes weight, keeping the pressure off even when using a tool belt. The worker needs to be as comfortable as possible while on the job site, and the B2002-X makes it easier to keep working productively while remaining safe on the job. (Various Sizes Available) Along with being the only accepted form of personal fall arrest protection you can use, this harness, which features a crotch strap with a buckle and tongues, meets the American National Standards Institute (ANSI) and Occupational Safety and Health Administration (OSHA) standards. We take pride in meeting and exceeding these guidelines to help you prevent workplace accidents. With customization options available, the Warthog Full-Body Harness will surely be your workers' new go-to safety equipment. Experience unbeatable protection and comfort with this cutting-edge design. How to Achieve the Perfect Fit Once you've obtained the full-body harness with quick disconnect buckles, achieving the perfect fit is just as important. Ensuring the harness fits correctly helps protect your workers and keep them safe if they do fall on the site. To make sure the harness will work as it should, be sure to: Holding the D-Ring, shake the Warthog safety harness and then unfasten any straps. Put the harness straps over your shoulders, ensuring the D-Ring stays centered on your back. Put each leg through the leg straps one at a time, snuggly attaching the straps to the connector. Secure the waist belt if your harness has one. Fasten the chest strap, keeping it around 6 to 8 inches under your throat. Keep Your Workers Safe and Compliant With Malta Dynamics Getting the Warthog full-body harness with tongue buckle legs from Malta Dynamics means you'll be partnering with a full-service manufacturing company. Unlike other companies, we take pride in using our safety harnesses instead of only designing, engineering and manufacturing them for our customers. Our team has over three decades of experience in the construction industry. Because we specialize in fall protection solutions, you can trust we'll deliver efficient, durable and affordable products every time. All our harnesses can withstand tough challenges, no matter what industry you are in. At Malta Dynamics, we do more than just provide businesses with comfortable, safe and compliant equipment. We also back up each harness we sell with a 100% satisfaction guarantee and Declarations of Conformity for every product. Have any questions or interested in learning more about our full-body harnesses? Call us at 800-494-1840 or fill out our online contact form — we'll get in touch with you as soon as possible. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$85.99 Select options This product has multiple variants. The options may be chosen on the product page
Rated 4.69 out of 5
(98)

WARTHOG^® TONGUE AND BUCKLE HARNESS
SKU: VARIOUS. A full-body harness, which is an integral part of a personal fall arrest protection system, helps keep your workers safe — no matter if they are working on a construction site or performing rescue work. When connected to a safety line, these nylon, polyester and steel harnesses protect vital organs and prevent casualties by safeguarding wearers from falling to the ground. The Warthog Full-Body Harness with Tongue Buckle Legs is the best available economy harness on the market. Classified as a Class 3 full-body harness, it works well for countless full-body applications. It can be used with a worker capacity range of 130 to 310 pounds while limiting the arresting force to no more than 1,800 pounds. No matter the project, these harnesses can withstand tough tasks day in and day out. The Warthog has dual lanyard keepers to hold lanyards out of the way while working. The Warthog also comes with a customizable label where workers can record information on harnesses without jeopardizing webbing integrity. Because the Warthog safety harness is constructed with a one-piece structure, you can trust it will stay in place without slipping. It features leg connections that can be easily adjusted and tightened to help you achieve the perfect fit. Whatever your workers' size requirements are, the Warthog Full-Body Harness with Tongue and Buckle Legs can be customized to meet their needs — without damaging the webbing. The Warthog full-body harness is also designed for efficiency and affordability while meeting the strict ANSI and OSHA testing requirements and standards. By offering these full-body harnesses, Malta Dynamics helps keep your workers compliant with industry guidelines and safe from workplace accidents. How to Adjust and Wear the Warthog Harness While the Warthog full-body harness delivers reliable protection, it's important to ensure it's properly adjusted at all times. Your business's harnesses need to be regularly inspected, and each worker needs to ensure their harness fits correctly. You can do this by: Holding the D-Ring, shake the Warthog safety harness, and then unfasten any straps. Slipping the straps over your shoulders, making sure the D-Ring is centered on your back. Putting each leg through the straps and then attaching the straps to the connector. Fastening the waist belt, if your harness has one. Connecting the chest strap, which should stay 6 to 8 inches under your throat. Experience Industry-Leading Fall Protection and Safety Harnesses At Malta Dynamics, we have over three decades of experience in the construction industry creating fall protection and safety harnesses that our own team uses every day. As a full-service manufacturing company, we understand which safety, performance and comfort features you desire and work to exceed all your expectations. Our Warthog Tongue and Buckle Harness has been both designed and tested to keep your workers safe. Malta Dynamics is a trusted industry leader, putting safety first across an array of industries throughout the nation. With your purchase, you can experience peace of mind with our 100% satisfaction guarantee on all harnesses. Interested in learning more? Reach out to us by calling us at 800-494-1840 or filling out our online contact form. We'll be in touch with you soon. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$63.99 Select options This product has multiple variants. The options may be chosen on the product page
Rated 4.69 out of 5
(80)

WARTHOG^® PASS-THRU HARNESS
SKU: VARIOUS. To support your workers and ensure they go home safe at the end of the day, your business needs harnesses specifically for working at heights. No matter what type of construction projects your company is working on, a pass-thru harness will securely connect to safety lines and protect your workers. By reducing impact and keeping workers from falling onto the ground, you can experience peace of mind knowing accidents won't become casualties on your job site. The Malta Dynamics Warthog Full-Body Harness with Pass-Thru Leg Buckles is the best available economy harness on the market. You'll get some of the most functional and efficient features, all at an affordable rate. This harness, which is a Class 3 full-body model, can be used for rescue, travel restraint and positioning. The Warthog has dual lanyard keepers to hold lanyards out of the way while working. The Warthog also comes with a customizable label where workers can record information on harnesses without jeopardizing webbing integrity. With its latch connection at the legs, the pass-through harness will stay in place without being a distraction or disrupting work. Overall, the Warthog is designed for efficiency and affordability while meeting the strict ANSI and OSHA testing requirements and standards. This harness provides your workers with protective equipment that will help distribute their weight and support them on the job. Whatever full-body application you use the Malta Dynamics Warthog for, you can trust your business can keep its workers safe, comfortable and compliant. With sizes ranging from XS to 3XL, this adjustable safety harness will help you get the job done affordably — no matter what your workers' needs are. How to Wear and Adjust the Pass-Thru Safety Harness For the ultimate in safety and comfort, the Warthog Pass-Thru Harness has you covered. To ensure your harness will provide you with the protection it's designed to deliver, make sure it fits properly. To modify the adjustable safety harness to your body, all you have to do is: Holding the D-Ring shake your pass-thru harness and then unfasten any straps. Slip the harness's straps over your shoulders, and make sure the D-Ring stays centered on your back. Put each leg one at a time through the leg straps. Then, attach the straps to the connector, making sure it's snug. Fasten the harness's waist belt, if it has one. Connect the chest strap and ensure it stays against your breastbone, at around 6 to 8 inches below your throat. Take Advantage of the Malta Dynamics Difference Here at Malta Dynamics, all our adjustable safety harnesses are backed by over three decades of experience in the construction industry. Our extensive construction and manufacturing background and passion for delivering harnesses built to withstand tough tasks has resulted in some of the most trusted fall protection and safety harness equipment available. While we are a full-service manufacturing company, what sets us apart is that we do more than just design, engineer and manufacture safety harnesses — we also use the products we make every day. Whichever industry you are in, you can count on the Warthog Pass-Thru Harness to keep your workers comfortable, compliant and safe. All our harnesses come with our 100% satisfaction guarantee, giving you the solutions you need within numerous industries. If you have any questions about our harnesses and equipment, we are here to help. Reach out today by calling us at 800-494-1840 or filling out our online form, and we'll be in touch with you soon. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$41.99 Select options This product has multiple variants. The options may be chosen on the product page
Rated 4.67 out of 5
(58)

WARTHOG® SIDE D-RING HARNESS
SKU: VARIOUS. When your business tackles projects that involve working at heights, it's imperative to have a personal fall arrest protection system to keep your workers safe. Falls are one of the leading causes of serious injury and death, making harnesses a necessity. Safety harnesses reduce the impact of a fall and keep workers in an upright, elevated position. At Malta Dynamics, we are a top source for fall protection solutions. Our harnesses, which can connect to safety lines, help protect and keep your business in compliance. Both the American National Standards Institute (ANSI) and the Occupational Safety and Health Administration (OSHA) have certain standards which must be followed at all times to prevent workplace injuries. With our equipment — like the Warthog Full-Body Universal Harness with Side D-Rings — you can feel confident knowing that even if your workers are at an elevated height or walking along unprotected sides and edges, they will be safe daily. The Warthog Side D-Ring Harness has dual lanyard keepers to hold lanyards out of the way while working. The Warthog also comes with a Premium Velcro Label Jacket to protect the labels on the job site. The Warthog is designed for efficiency and affordability while meeting the strict ANSI and OSHA testing requirements and standards. (Various Sizes Available) Why Choose Our Safety Harness Kits and D-Ring Harnesses? When you're working at heights, you need a safety harness that will keep you secure throughout the day. With the Warthog full body harness, you get reliable support across your body with tongue and buckle leg straps as well as sturdy nylon and polyester construction. Safety D-Rings on each side offer simple tying off and work positioning for any environment. Pair our safety harness with accessories like a Suspension Trauma Relief Strap or D Ring Extender for greater security and peace of mind. Use a tool lanyard to keep your critical devices at your side. With lanyard keepers built into the harness straps, your lanyard will stay close by without interrupting your workflow. Additional features of the Side D-harness include new reflective material for better visibility in dark spaces and ID labels with protective jackets. Tags are vital for keeping your equipment organized and understanding all features and components of the equipment. With a protective cover, your label stays clear and readable, even after several tough jobs. Warthog safety harnesses can handle 130 to 310 pounds, making them a dynamic solution for many workers on your team. When you use a Side D-harness, you get the guaranteed safety of OSHA and ANSI compliance for any application. Harness and Lanyard Kit Applications Working at heights is a standard in the construction industry. Whether you're working on scaffolding for a building project or hanging over water for bridge development, our harnesses offer the strength and security you need. Our safety harnesses also work well for general maintenance in buildings. When you're on high ladders or using powered platforms, OSHA requires fall protection. Our harnesses are also valuable in warehouses and industrial settings as well as for telecommunications and the marine sector. Our harness systems are ideal for environments like: Telephone poles Ship decks and barges Elevators Manlifts Why Work With Malta Dynamics? At Malta Dynamics, we know what workers want and need from safety systems, because we’re workers ourselves. This aspect of our company is what sets our full-service manufacturing business apart — our team uses the safety equipment we manufacture every day. We understand the safety and comfort features you need when working in heavy-duty trades because we face those same challenges. We always ensure our equipment is compliant with industry regulations, and we trust our harness kits on the job. Our team is continuously developing our designs for improved safety and comfort for every user. Because we handle everything from the initial designs to the final production, we have control over every step of the process. With a focus on customer satisfaction, we’re here to guide you through your options to meet your fall protection needs. From harness kits to accessories, we can help you find what you need for your next job. We provide economical options for construction crews and other industries so you can get more for your money without sacrificing dependable performance. We manage all testing procedures in our ISO-17025 certified lab, and we offer certification online for all of our products. At Malta Dynamics, you’re safe with us. How to Adjust the Safety Harness Kits to Achieve the Correct Fit Equipping your workers with Warthog harnesses helps ensure they are protected while on the job. Making sure the new harness fits each worker properly is just as important. Doing this enables the safety features to function as they should. Here's how to find the right fit: Hold the harness by the back D-Ring and shake it out, then unfasten any straps. Put the shoulder straps on and make sure the D-Ring stays centered on your back. Put the leg straps on and attach those straps snugly onto the connector. Attach the waist belt, if your harness has one. Connect the chest strap, keeping it around 6 to 8 inches below your throat. Keep Your Job Site Safe and Compliant With the Safety Harness Kit Here at Malta Dynamics, we have over three decades of experience working in the construction industry. With our firsthand knowledge and expertise, we've become a trusted industry leader, providing safety equipment to sectors across the nation — ranging from warehousing to manufacturing. As a full-service manufacturer, we oversee the design, engineering and manufacturing process of all our harness and lanyard kits. We can help keep your business compliant and your workers safe with equipment that can withstand tough tasks and environments. With our 100% satisfaction guarantee, you can trust we'll do whatever it takes to meet all your needs. Have any questions about our safety harnesses? Our team is here to help you find effective solutions. Just call us at 800-494-1840 or fill out our online contact form and we'll help you get started. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$58.99 Select options This product has multiple variants. The options may be chosen on the product page
Rated 4.47 out of 5
(36)

RAZORBACK ELITE MAXX STERNAL D-RING HARNESS
SKU: VARIOUS. Working in heavy-duty trades or from elevated heights like rooftops increases the chance of injury. Keeping your workers safe in these kinds of environments should be a top priority with whichever industry you're in. Whenever the risk of a fall is present, your business will need to utilize a personal fall arrest protection program to help support your workers, keeping them in an upright position and above the ground. Malta Dynamics safety harnesses deliver efficiency, durability and affordability. We can help your business prevent a fall from becoming a casualty with our safe, comfortable gear. Specifically, the Malta Dynamics Razorback Elite MAXX Sternal D-Ring Harness is designed to prepare your crew for any job at heights, including tower and fixed ladder climbing. This sternal D-Ring harness will deliver functionality and innovation with a lightweight design that makes it easy to wear all day on any job. With front, back and side D-Rings, this versatile harness will be ready for any job site — and so will you. Use the front D-Ring to safely climb to new heights. Easily connect self-retracting lifelines without having to adjust the webbing by utilizing the back D-Ring, or use the side D-Rings for hands-free positioning. Complete with a sewn-in waist belt and breathable, reflective padding on the shoulders and legs, this lightweight harness also features reflective stitching throughout the webbing. To keep your business compliant, this harness meets regulatory guidelines under the American National Standards Institute (ANSI) and the Occupational Safety and Health Administration (OSHA). With our products, you can trust your company will be doing everything possible to keep its workers compliant when tower climbing or using fixed ladders. When you are looking for a safe, compliant harness for your job site, the Razorback Elite MAXX Sternal D-Ring will exceed your expectations and deliver unbeatable protection. How to Ensure Your Razorback Elite MAXX Harness Fits Correctly Equipping your workers with the Razorback Elite MAXX Sternal D-Ring harness increases the chances that they'll stay safe from serious injuries or death should a fall occur. No matter what size or scope of construction project your team is working on, the harness needs to fit each worker correctly. By following these quick and easy steps, you can achieve a comfortable, safe fit: Holding the back D-Ring shake the Elite MAXX safety harness and then unfasten any straps. Place the straps over your shoulders while making sure the D-Ring stays centered on your back. Put each leg through the leg straps, keeping the connections snug. Fasten the harness's waist belt, if it has one. Attach the chest strap, leaving it against your breastbone but 6 to 8 inches below your throat. Malta Dynamics Can Keep Your Site Safe and Compliant With over three decades of experience in the construction industry, Malta Dynamics has the understanding and safety harness solutions you need to keep your work site safe and compliant. Whether you are in the masonry, manufacturing or warehousing industry, our fall protection and safety harness equipment can withstand challenges and surpass safety standards. Because we are a full-service manufacturing company, we have complete control over our products. While we design, engineer and manufacture all of our fall protection harnesses, we personally use them too. Along with experiencing peace of mind knowing your workers are safe, comfortable and compliant, you can trust that all our products are also backed by our 100% satisfaction guarantee. Have any general questions about our products? Interested in learning more about our Malta Dynamics Razorback Elite MAXX Sternal D-Ring Harness? Our team will assist you in finding the right safety solutions. Call 800-494-1840 for a representative or fill out our form. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet B4200 Declaration of Conformity B4201 Declaration of Conformity B4202 Declaration of Conformity B4203 Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$185.49 Select options This product has multiple variants. The options may be chosen on the product page
Rated 4.21 out of 5
(63)

WARTHOG® MAXX BELTED SIDE D-RING HARNESS
SKU: VARIOUS. When you need an accepted form of personal fall arrest protection, count on a full-body harness to get the job done. These harnesses, which are the only form of protection you can use on your job site for fall arrest, help protect your workers while they complete projects in heavy-duty trades or work from elevated heights like rooftops. With fall safety equipment, you can feel confident knowing your team can work effectively and comfortably daily without the risk of a casualty. At Malta Dynamics, we carry some of the most dependable safety solutions. Our team has years of experience in the construction industry, which provides us with the firsthand knowledge needed to help you overcome workplace safety challenges. No matter what industry you are in, the Warthog MAXX Construction Full-Body Harness with Tongue Buckle Legs, Side D-Rings and a Removable Belt is designed to help protect workers. It is a Class 3 full-body harness, which can be used for rescue, positioning and travel restraint. Built for greater comfort with additional adjustability and a padded removable waist belt to protect the worker, this is the most cost-effective harness of its class. Like the Warthog, the Warthog MAXX comes standard with dual lanyard keepers and a customizable label, and it is ANSI compliant and meets all applicable OSHA standards. It has been designed and tested to ensure it will support the wearer, distribute the forces of a fall and keep the wearer's body upright and elevated if they do fall. Experience safety, comfort and compliance today at an affordable rate with this belted D-Ring harness. (Various Sizes Available) How to Adjust the Belted D-Ring Harness to Achieve the Perfect Fit Equipping your workers with the Warthog MAXX Harness with Belted Side D-Rings ensures your job site is safe and compliant at all times. It's imperative to make sure each harness fits correctly so the safety features will work as they were designed to. To adjust the harness, follow these quick and easy steps: Holding the back D-Ring shake the Belted D-Ring safety harness and then unfasten any straps. Place the straps over your shoulders while making sure the D-Ring on the harness stays centered on your back. Step into the leg straps and then attach those straps onto the connector, making sure the fit is snug. Make sure the waist belt also connects snugly. Attach the chest strap, ensuring it stays around 6 to 8 inches under your throat. Keep Your Job Site Safe With Side D-Ring Harnesses From Malta Dynamics For over three decades, Malta Dynamics has been proudly delivering trusted fall protection solutions for the construction industry. As a full-service manufacturing company, we design, engineer and manufacture the harnesses you need to keep your workers safe, comfortable and compliant. Unlike other full-service manufacturing businesses, we use the products we make ourselves. We understand your tough challenges firsthand, which is what inspires us to create durable, efficient and affordable safety solutions. Whichever industry your business is in, you can experience peace of mind knowing your harness is backed by our 100% satisfaction guarantee. If you have any questions or would like to learn more about our full-body harnesses, our team is here to help. Call us at 800-494-1840 or complete our contact form. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$113.99 Select options This product has multiple variants. The options may be chosen on the product page
Rated 4.84 out of 5
(57)

RAZORBACK ELITE STERNAL D-RING HARNESS
SKU: VARIOUS. Here at Malta Dynamics, we understand the risks of working from elevated heights and in heavy-duty trades. We have firsthand experience from working in the construction and masonry industries ourselves for over three decades. To prevent serious injuries or casualties on the job site, having a dependable fall protection system is key. This is why we offer the Razorback Elite Sternal D-Ring Harness to help support your workers. The Razorback Elite MAXX safety harness was designed to be one of the lightest weight safety harnesses available with all of the hardware you need to work in any situation. With every industry, you can trust this safety harness will keep workers upright and above the ground if they do fall. This harness keeps them safe while also maintaining the best position for lowering or rescuing with the built-in shoulder handles. With front, back and side D-Rings, you will be ready for any job site in this versatile Class 3 full-body harness. Use the front D-Ring to safely climb to new heights. Easily connect self-retracting lifelines without adjusting the webbing by utilizing the back D-Ring, or use the side D-Rings for hands-free positioning. Complete with breathable, reflective padding on the shoulders and legs, this lightweight harness also features reflective stitching throughout the webbing. While it delivers plenty of safe, functional and comfortable features, this harness also complies with both Occupational Safety and Health Administration (OSHA) and American National Standards Institute (ANSI) standards. This harness, which is the only accepted form of personal fall arrest protection you can use on the job, will keep your business in compliance with crucial regulations. Whether you use it for rescue, positioning or travel restraint, this harness will help your workers safely complete their jobs day after day. How to Achieve the Correct Fit With the Razorback Harness The Razorback Elite Sternal D-Ring harness will help keep your business and workers compliant. While it protects against harm from falls, it needs to be adjusted correctly to work as it should. Achieving the right fit is quick and easy. Once you receive the harness, simply: Holding the back D-Ring, shake the harness out and unfasten any straps. Put the shoulder straps on while keeping the D-Ring centered on your back. Put the leg straps on and attach each one to the connector. Make sure the connectors remain snug. Attach the waist belt. Connect the chest strap, keeping it 6 to 8 inches below your throat. Experience the Malta Dynamics Difference With Our Safety Harnesses When your business needs safe, comfortable and compliant fall protection and safety harness equipment, Malta Dynamics has you covered. With our passion and expertise, we design, engineer and manufacture trusted safety solutions that protect workers every day. Like the rest of our products, our Razorback Elite Sternal D-Ring Harness is backed by over 30 years of construction industry expertise. Unlike other full-service manufacturing companies, we take pride in using the harnesses we manufacture every day. You can trust that we understand your industry's challenges and will help you develop an efficient and affordable solution based on your specific needs. Whether you are in the manufacturing, construction or warehousing industry, our quality, dependable equipment and services will keep your workers safe. No matter which harness you purchase, we will back it with our 100% satisfaction guarantee. Have any questions about our Razorback harness? Complete our contact form to get more information or call us at 800-494-1840. We'll be in touch with you as soon as possible. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet B4000 Declaration of Conformity B4001 Declaration of Conformity B4002 Declaration of Conformity B4003 Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$163.99 Select options This product has multiple variants. The options may be chosen on the product page
save 53%Exclusive Discount Price!

(0)

WARTHOG® TONGUE AND BUCKLE FULL-BODY HARNESS (WITH X-PAD) MCAA EDITION
SKU: VARIOUS. Keeping your workers safe and protected on the job site should be a top priority. Any time construction work involves heights, having protective, compliant equipment is all the more important. This is because falls are one of the leading causes of serious injury and death on construction sites where workers perform jobs on elevated surfaces like rooftops. At Malta Dynamics, we carry an array of full-body harnesses with buckles that help prevent falls from becoming casualties. Because these harnesses support workers and can function with both self-retracting lifelines or shock-absorbing lanyards, you can feel confident knowing your contractors will be fully protected day in and day out. For ultimate comfort, the Malta Dynamics Warthog Full-Body Harness comes with the special X-Pad as a standard accessory. The X-Pad Back Pad is a great comfort accessory for your harness, enhancing worker satisfaction, productivity and compliance. It is the “preferred” harness for Malta Dynamics’ sister company Lang Masonry and Restoration. The innovative design provides extra comfort throughout the neck, shoulders and back. The one-piece design eliminates shoulder pad slippage — shoulder pads stay in place and will not slide off. The padding redistributes weight, keeping the pressure off even when using a tool belt. The worker needs to be as comfortable as possible while on the job site, and the B2002-X makes it easier to keep working productively while remaining safe on the job. (Various Sizes Available) Along with being the only accepted form of personal fall arrest protection you can use, this harness, which features a crotch strap with a buckle and tongues, meets the American National Standards Institute (ANSI) and Occupational Safety and Health Administration (OSHA) standards. We take pride in meeting and exceeding these guidelines to help you prevent workplace accidents. With customization options available, the Warthog Full-Body Harness will surely be your workers' new go-to safety equipment. Experience unbeatable protection and comfort with this cutting-edge design. How to Achieve the Perfect Fit Once you've obtained the full-body harness with quick disconnect buckles, achieving the perfect fit is just as important. Ensuring the harness fits correctly helps protect your workers and keep them safe if they do fall on the site. To make sure the harness will work as it should, be sure to: Holding the D-Ring, shake the Warthog safety harness and then unfasten any straps. Put the harness straps over your shoulders, ensuring the D-Ring stays centered on your back. Put each leg through the leg straps one at a time, snuggly attaching the straps to the connector. Secure the waist belt if your harness has one. Fasten the chest strap, keeping it around 6 to 8 inches under your throat. Keep Your Workers Safe and Compliant With Malta Dynamics Getting the Warthog full-body harness with tongue buckle legs from Malta Dynamics means you'll be partnering with a full-service manufacturing company. Unlike other companies, we take pride in using our safety harnesses instead of only designing, engineering and manufacturing them for our customers. Our team has over three decades of experience in the construction industry. Because we specialize in fall protection solutions, you can trust we'll deliver efficient, durable and affordable products every time. All our harnesses can withstand tough challenges, no matter what industry you are in. At Malta Dynamics, we do more than just provide businesses with comfortable, safe and compliant equipment. We also back up each harness we sell with a 100% satisfaction guarantee and Declarations of Conformity for every product. Have any questions or interested in learning more about our full-body harnesses? Call us at 800-494-1840 or fill out our online contact form — we'll get in touch with you as soon as possible. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
Original price was: $85.99.Current price is: $39.99. Select options This product has multiple variants. The options may be chosen on the product page
(0)

WARTHOG® COMFORT MAXX STEEL HARNESS
SKU: VARIOUS. A steelworker inspired version of our best-selling Comfort Maxx, this all-new harness features upgrades to the belt so it better handles popular tool bags, a higher D-ring and dual lifeline attachment point to lessen strain on the lower back, and a pre-installed trauma relief strap. Combine these features with the comfort and durability of the original, and its own unique color-scheme, the Comfort Maxx Steel is sure to be a favorite for all industries. How to Adjust the Warthog MAXX Steel D-Ring Harness and Achieve the Right Fit Having the right personal fall arrest protection is key to making sure your workers stay safe when working from elevated heights or in heavy-duty trades. Ensuring the harness fits correctly is just as important, allowing the safety features to work properly. With every construction project your business takes on, here's how you can make sure your harnesses are adjusted and fit as they should: Holding the D-Ring shake the Comfort MAXX Steel safety harness and then unfasten any straps. Put the straps over your shoulders while making sure the D-Ring centers on your back. Put each leg through the leg straps, ensuring all connectors stay snug. Secure the waist belt, keeping it snug as well. Connect the harness's chest strap so it remains 6 to 8 inches below your throat. Keep Your Job Site Safe and Compliant With Malta Dynamics With over three decades of experience in the construction industry, Malta Dynamics is your go-to source for belted harnesses with D-Rings. We are a full-service manufacturing company that designs, engineers and manufactures a wide range of safety harnesses, and unlike other businesses, we use our own equipment. We have firsthand experience from tackling countless workplace challenges over the years, and we understand what safety and comfort features you look for in a harness. The result? We are now proud to offer some of the most trusted fall protection and safety harness equipment available on the market. If you have any questions about our Warthog Comfort MAXX Steel Harness, our team is here to help. Fill out our form or speak to a representative at 800-494-1840. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Harness Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$182.99 Select options This product has multiple variants. The options may be chosen on the product page
(0)

Aerial Lift Fall Restraint Kits
SKU: VARIOUS. Perfect for use in mobile elevated work platforms such as man lifts, cherry pickers, scissor lifts! What's Included: Warthog Tongue and Buckle Harness (B2006, B2002, B2003, B2004) A full-body harness, which is an integral part of a personal fall arrest protection system, helps keep your workers safe — no matter if they are working on a construction site or performing rescue work. When connected to a safety line, these nylon, polyester and steel harnesses protect vital organs and prevent casualties by safeguarding wearers from falling to the ground. The Warthog Full-Body Harness with Tongue Buckle Legs is the best available economy harness on the market. Classified as a Class 3 full-body harness, it works well for countless full-body applications. It can be used with a worker capacity range of 130 to 310 pounds while limiting the arresting force to no more than 1,800 pounds. No matter the project, these harnesses can withstand tough tasks day in and day out. The Warthog has dual lanyard keepers to hold lanyards out of the way while working. The Warthog also comes with a customizable label where workers can record information on harnesses without jeopardizing webbing integrity. With the pre-installed X-Pad, workers will also stay comfortable thanks to this cutting-edge feature. Even if you are wearing a tool belt, the X-Pad will help relieve pressure on your back, neck and shoulders. Because the Warthog safety harness is constructed with a one-piece structure, you can trust it will stay in place without slipping. It features leg connections that can be easily adjusted and tightened to help you achieve the perfect fit. Whatever your workers’ size requirements are, the Warthog Full-Body Harness with Tongue and Buckle Legs can be customized to meet their needs — without damaging the webbing. The Warthog full-body harness is also designed for efficiency and affordability while meeting the strict ANSI and OSHA testing requirements and standards. By offering these full-body harnesses, Malta Dynamics helps keep your workers compliant with industry guidelines and safe from workplace accidents. Restraint Lanyard (C5200) When working in environments that require fall restraint or positioning, the Malta Dynamics Restraint Lanyard is the perfect solution. Featuring a single leg construction design, the fall restraint lanyard length easily adapts from 4’ to 6’. When used together, a full body harness with adjustable restraint lanyard is ideal for use in bucket trucks and lifts to prevent the possibility of a fall. The adjustable restraint lanyard features a 1” webbing that is composed of sturdy polyester and nylon with a tensile strength of 9,800 lbs. Built to encounter the harshness of a jobsite, this adjustable fall restraint lanyard boasts UV resistant high-visibility orange webbing. This fall restraint lanyard also features a convenient label protector to keep all your manufacturer’s important information safe and legible per OSHA requirements. On each end of the adjustable work restraint lanyard, you’ll find a durable self-locking alloy steel snap hook. These hooks are low profile and make clipping to and from the anchor point and the back D-Ring on your harness (or fall restraint belt) safe and simple. The adjustable fall restraint lanyard weighs just 2.4 lbs. and meets the strict standards of ANSI Z359.3 and is compliant with OSHA 1926.502. Per the ANSI worker weight range specifications, workers that weigh between 130-310 lbs. can be supported and protected with this adjustable lanyard. The Malta Dynamics Restraint Lanyard is an effective piece of fall protection equipment to keep you safe while working in hazardous work conditions. EQUIPMENT DUFFLE BAG (K1002) The Malta Dynamics Equipment Duffle Bag is perfect for harnesses, lanyards or other small fall protection equipment, this carry bag keeps your equipment mobile. The Equipment Bag has two convenient carry handles and a shoulder strap. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Declaration of Conformity Harness Inspection Form Lanyard Manual Lanyard Spec Sheet Declaration of Conformity Lanyard Inspection Form Bag Spec Sheet
$111.49 Select options This product has multiple variants. The options may be chosen on the product page
(0)

JAVELINA HARNESS
SKU: VARIOUS. A full-body harness is an integral part of a personal fall arrest system that helps ensure safety while working at heights. When combined with other fall protection equipment, these nylon, polyester, and steel harnesses protect vital organs and prevent casualties by stopping impact with the ground during a fall. The Javelina Full-Body Harness with Quick Connect Chest Buckles and Tongue & Buckle Legs is the best available economy harness on the market. This roof safety harness can be used with a worker capacity range of 130 to 310 lbs. and has been tested to ANSI and OSHA fall protection standards that include ANSI Z359.11-2021, OSHA 1910.66, and OSHA 1926.502, Subpart M. No matter the project, these harnesses can withstand tough tasks day in and day out. The Javelina fall protection harness has dual break-away lanyard keepers to hold lanyards out of the way while working and comes with a customizable label where workers can record information on harnesses without jeopardizing the integrity of the webbing. Because Javelina safety harnesses are constructed as a one-piece structure, workers can trust that it will stay in place without slipping. This harness features tongue and buckle leg connections with metal grommets that can be easily adjusted and tightened to help achieve the perfect fit. The quick-connect check buckle allows workers to set their perfect fit and makes getting in out of the harness quick and simple. Whatever your workers’ size requirements are, the Javelina Full-Body Harness can be customized to meet their needs — without damaging the webbing. The Javelina Full Body Back D-Ring Universal Harness with Tongue and Buckle Legs and Quick Connect Chest fasteners is the harness that everyone says they want, but no one makes. Well, Malta Dynamics listens to our customers’ requests and now offers the ideal harness for long days on the jobsite. How to Adjust and Wear the Javelina Harness While the Javelina full-body harness delivers reliable protection, it's important to ensure it's properly adjusted at all times. Your business's harnesses need to be regularly inspected, and each worker needs to ensure their harness fits correctly. You can do this by: Holding the D-Ring, shake the Javelina safety harness, and then unfasten any straps. Slipping the straps over your shoulders, making sure the D-Ring is centered on your back. Putting each leg through the straps and then attaching the straps to the connector. Fastening the waist belt, if your harness has one. Connecting the chest strap, which should stay 6 to 8 inches under your throat. Experience Industry-Leading Fall Protection and Safety Harnesses At Malta Dynamics, we have over three decades of experience in the construction industry creating fall protection and safety harnesses that our own team uses every day. As a full-service manufacturing company, we understand which safety, performance and comfort features you desire and work to exceed all your expectations. Our Javelina full-body Harness has been both designed and tested to keep your workers safe. Malta Dynamics is a trusted industry leader, putting safety first across an array of industries throughout the nation. With your purchase, you can experience peace of mind with our 100% satisfaction guarantee on all harnesses. Interested in learning more? Reach out to us by calling us at 800-494-1840 or filling out our online contact form. We'll be in touch with you soon. Product Downloads: Harness Selection Guide Harness Manual Harness Spec Sheet Declaration of Conformity Harness Inspection Form [ryviu_question_and_answer] [ryviu_widget_total] [ryviu_widget]
$97.99 Select options This product has multiple variants. The options may be chosen on the product page