RENT The Engineered Davit Anchors
| Daily | Weekly | Monthly |
| $300 | $1200 | $2500 |
X500: Rotatable 360-Degree Overhead Anchor
The X500 is a free-standing, one-user, mobile fall protection system. The anchor height is 25’ from the ground level, and the mast rotates 360 degrees with no more than the push of a hand. The multi-position boom lock allows a user to place the anchor point directly above them, minimizing free fall distance in the case of a fall, and eliminating the additional hazards of falling while anchored below a user’s D-ring.
The base is a factory-filled counterweight with fork pockets for easy transport around a facility, crane pick points can be used for transport and assembly, and fully adjustable jacks to ensure a level height for your X500, even if the ground is not level. This machine comes ready-to-use after just a few minutes of assembly, it undergoes strict testing parameters, and exceeds anchorage requirements for OSHA.
The X500 is the most versatile, easy to assemble singe davit arm fall protection anchor available, and it’s built in an ISO-9001 factory, right here in the USA.
At Malta Dynamics we are proud to make products that are Field Tested, and Field Approved. The X500, and all our products are engineered and designed to provide safe and simple user-friendly experiences. We come from the field and know that you need high-quality safety products that work the way they should every time.
Meet with an XSERIES expert to discuss your fall protection needs. Schedule a meeting today.
| Weight | 6600 lbs. |
| Max. Working Height | 25’3″ (6.7m) |
| Width | 6’2″ (1.9m) |
| Length | 13’2″ (3.96m) |
| Max. Anchor Point Capacity | 310 lbs. |
| Max. Allowable Users | 1 |
| Daily | Weekly | Monthly |
| $325 | $1250 | $2450 |
X550: Truck Counterweighted Anchor
The X550 is a truck-counterweight, one-user
mobile fall protection system. The anchor height is 22’ from the ground level,
and the anchorage is in a fixed location.
The X550 is designed specifically for providing
fall protection anchorage for one user while loading and unloading trucks. The
drive-over thresholds allow a driver to feel when the truck is positioned as
the counterweight, then procedures should be followed to ensure the truck does
not move during the time a worker is tied off to the X550. There are minimum
requirements and specifics to become familiar with before utilizing the X550.
When not in-use for active fall arrest, the X550
is free-standing, and features fork pockets for easy transport around a
facility.
The X550 is built in an ISO-9001 factory, right
here in the USA, and undergoes strict testing parameters, exceeding anchorage
requirements for OSHA.
At Malta Dynamics we are proud to make products
that are Field Tested, and Field Approved. The X550, and all our products are
engineered and designed to provide safe and simple user-friendly experiences.
We come from the field and know that you need high-quality safety products that
work the way they should every time.
Meet with an XSERIES expert to discuss your fall protection needs. Schedule a meeting today.
| Weight | 2271 lbs. |
| Max. Working Height | 22′ (6.71m) |
| Width | 7’5″ (2.26m) |
| Reach | 7’6″ (2.29m) |
| Max. Anchor Point Capacity | 310 lbs. |
| Max. Allowable Users | 1 |
DOWNLOADS AVAILABLE
Download Declaration of Conformity
Download Declaration of Conformity
