Tree stand safety you can trust and wear all day.
We’ve taken our expertise in Fall Protection and applied it to our passion for hunting. The Malta Hunting Safety line represents the most premium and comfortable tree stand products on the market.
The X500 is a free-standing, one-user, mobile fall protection system. The anchor height is 25’ from the ground level, and the mast rotates 360 degrees with no more than the push of a hand. The multi-position boom lock allows a user to place the anchor point directly above them, minimizing free fall distance in the case of a fall, and eliminating the additional hazards of falling while anchored below a user’s D-ring.
The base is a factory-filled counterweight with fork pockets for easy transport around a facility, crane pick points can be used for transport and assembly, and fully adjustable jacks to ensure a level height for your X500, even if the ground is not level. This machine comes ready-to-use after just a few minutes of assembly, it undergoes strict testing parameters, and exceeds anchorage requirements for OSHA.
The X500 is the most versatile, easy to assemble singe davit arm fall protection anchor available, and it’s built in an ISO-9001 factory, right here in the USA.
At Malta Dynamics we are proud to make products that are Field Tested, and Field Approved. The X500, and all our products are engineered and designed to provide safe and simple user-friendly experiences. We come from the field and know that you need high-quality safety products that work the way they should every time.
Meet with an XSERIES expert to discuss your fall protection needs. Schedule a meeting today.
Weight | 6600 lbs. |
Max. Working Height | 25'3" (6.7m) |
Width | 6'2" (1.9m) |
Length | 13'2" (3.96m) |
Max. Anchor Point Capacity | 310 lbs. |
Max. Allowable Users | 1 |
The X550 is a truck-counterweight, one-user mobile fall protection system. The anchor height is 22’ from the ground level, and the anchorage is in a fixed location.
The X550 is designed specifically for providing fall protection anchorage for one user while loading and unloading trucks. The drive-over thresholds allow a driver to feel when the truck is positioned as the counterweight, then procedures should be followed to ensure the truck does not move during the time a worker is tied off to the X550. There are minimum requirements and specifics to become familiar with before utilizing the X550.
When not in-use for active fall arrest, the X550 is free-standing, and features fork pockets for easy transport around a facility.
The X550 is built in an ISO-9001 factory, right here in the USA, and undergoes strict testing parameters, exceeding anchorage requirements for OSHA.
At Malta Dynamics we are proud to make products that are Field Tested, and Field Approved. The X550, and all our products are engineered and designed to provide safe and simple user-friendly experiences. We come from the field and know that you need high-quality safety products that work the way they should every time.
Meet with an XSERIES expert to discuss your fall protection needs. Schedule a meeting today.
Weight | 2271 lbs. |
Max. Working Height | 22' (6.71m) |
Width | 7'5" (2.26m) |
Reach | 7'6" (2.29m) |
Max. Anchor Point Capacity | 310 lbs. |
Max. Allowable Users | 1 |