The Grabber with Extending Mast

X1250 The Grabber Mobile Fall Protection System provides up to two (2) overhead anchor points – anytime, anywhere. The Grabber meets OSHA fall protection codes and ANSI Z359.6 design requirements for fall arrest systems, and has been validated by an independent 3rd party ISO 17025 testing laboratory. The versatile Grabber is designed to be used in either fall arrest or fall restraint and features a one-of-a kind adjustable mast that can be positioned anywhere between 2’ and the unprecedented maximum height of 34’.

SKU: X1250 Category:
Description

Description

Grabber-Logo

Overhead Anchorage – Anytime, Anywhere.

x1250-in-use

The Grabber Mobile Fall Protection System provides up to two (2) overhead anchor points – anytime, anywhere. The Grabber meets OSHA fall protection codes and ANSI Z359.6 design requirements for fall arrest systems, and has been validated by an independent 3rd party ISO 17025 testing laboratory.

The versatile Grabber is designed to be used in either fall arrest or fall restraint and features a one-of-a kind adjustable mast that can be positioned anywhere between 2’ and the unprecedented maximum height of 34’.

grabber-x1240-wireframes

grabber-x1250-wireframes

[ultimate_info_table design_style=”design04″ package_heading=”Grabber X1240″ package_sub_heading=”Features” features_min_ht=”10″]● Two (2) Fall Arrest Anchor Points for Simultaneous Tie-off

● 30′ Maximum Height Supports Wide Range of Uses

● 100% Hydraulic Mast & Counterweight for Ease of Use & Quick Setup Time

● Incomparable Mobility & Interstate Travel

● 6′ Wide Frame Makes Tight Areas Accessible

● Ships Ready to Go – No Assembly Required![/ultimate_info_table]

[ultimate_info_table design_style=”design04″ package_heading=”Grabber X1250″ package_sub_heading=”Features” features_min_ht=”10″]● Two (2) Fall Arrest Anchor Points for Simultaneous Tie-off or One (1) Fall Arrest Anchor Point for Use with Telescoping Mast

● 34′ Maximum Height Supports Wide Range of Uses

● 100% Hydraulic Mast & Counterweight for Ease of Use & Quick Setup Time

● Incomparable Mobility & Interstate Travel

● 6′ Wide Frame Makes Tight Areas Accessible

● Ships Ready to Go – No Assembly Required![/ultimate_info_table]

Grabber-Badges




Grabber Options Available

The Grabber GO! Friction Drive Mobility Package (M1000) adds wireless, independent mobility to the Grabber Mobile Fall Protection System. Our system attaches 2 independent electric motors to the Grabber that drives its wheels, allowing you to position the Grabber without a vehicle attached. Note: The Grabber GO! is designed to be used on smooth level concrete surfaces.

The Grabber Wireless Control Option (W1000) has taken all the functions of the standard corded Grabber remote and shrunk them into a compact wireless control. This state of the art unit provides all the needed safety features as well as seamless, instant control of the Grabber with a range of up to 100ft.

The Grabber Solar Charger (S1000) harnesses the power of the sun to maintain the battery of the Grabber! Assuring maintenance-free performance, this system features high efficiency crystalline solar cells to provide greater power and state of the art electronics to control charging. The 60 Watt crystalline solar panels are weatherproof and made with a rugged aluminum frame as well as shatterproof tempered glass for superior durability.  The charge controller protects the Grabber battery from overcharge and discharge to ensure years of worry-free use. And best of all, the system is always working.

The Grabber Spare Tire Kit (ST1000) can be added to any existing Malta Dynamics Grabber. It can be ordered at the time of Grabber purchase or as a separate component later on. It is easily installed with a few hand tools. This option includes the spare tire and all needed hardware to mount the spare tire to an existing X1240 or X1250 Grabber model.

The Grabber becomes even more versatile with the optional Confined Space Rescue/Retrieval kit (R2000). Now the convenience of having overhead fall arrest anchor points – anytime, anywhere – can be combined with OSHA required rescue/retrieval options for confined spaces. Each Razorback Rescue/Retrieval unit not only provides fall protection but also allows an attendant to rescue a worker in need by raising or lowering (bi-directional winching capabilities) them to a safe level.



Downloads Available


 

Frequently Asked Questions

What kind of Self-Retracting Lifelines should be used with the Grabber?

We recommend a minimum of 30’ SRLs for use with the X1240 model and either 30’ or 50’ units for the X1250. These should be ANSI rated SRLs with an average arresting force of 900 lbs. or less. Malta Dynamics offers a metal housed 30’ unit in the Razorback™ C8001 or a composite housed unit in the Warthog™ C7001. Our 50’ unit is the Warthog™ C7002 – also a composite housed unit. Please always consider a rescue plan though, and take note of our R2000 rescue and confined space package which includes two 3-way self-retracting rescue devices.

Does the Grabber mast swivel, and how do I position the unit?

With the Grabber GO! Friction Drive Mobility Package (M1000) the entire unit will not only rotate 360°, but it can be safely positioned for final use in tight spaces. This can be accomplished with the mast in any position – raised or lowered.

Does the Grabber need a license plate?

It depends upon the state. The Grabber is not a trailer, but rather a towable piece of equipment that is classified the same as a generator or log splitter. You must check with your local department of transportation for clarification.

How many people can use the X1250?

It depends upon the application. When using the main mast with the extension boom fully retracted, up to two users can be attached using the anchors on the triangle anchor plate. When the extension boom is extended or in use, only one user can be attached to the Grabber at a time.

Can the Grabber be lifted via forklift or crane?

Yes. The Grabber X1240 and X1250 are equipped with two forklift pockets as well as four crane bail mounts. The crane bail mounts have been designed per the 13th Edition of AISC “Steel Construction Manual” for the ease of crane picks and loading.

Additional information

Additional information

Weight 6300 oz
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “The Grabber with Extending Mast”