Fall Protection Archives - Malta Dynamics

A6001 – 1″ Removable Concrete Anchor 10K

$196.79

The 1" Removable Concrete Anchor 10K is designed for use in 10 inch thick, cured concrete with a compression strength of at least 3000 p.s.i. It is suitable for fall arrest, fall restraint, and as a work positioning device.

Where to Buy

A6002 – 3/4″ Removable Concrete Anchor 5K

$104.91

The 3/4" Removable Concrete Anchor (Part # A6002) is designed for use in 12 inch thick cured concrete with a compression strength of at least 3000 p.s.i. It is easy to install (just compress its spring and insert the cable shaft into the hole). This multifunctional anchor may be used on vertical and overhead surfaces, as well as in combination with horizontal lifelines. It is suitable for fall arrest, restraint, and as a work positioning device. It has a maximum capacity of 400 pounds when used in combination with equipment certified for loads in excess of the OSHA and ANSI regulated maximum of 310 pounds. The 3/4" Removable Concrete Anchor fits holes of 3/4 inches in diameter and 3 inches deep, and has an ultimate breaking strength of 5,000 pounds.

Where to Buy

A6004 – 7/8″ Precast Concrete Toggle Lok Anchor 5K

$165.30

The 7/8" Precast Concrete Toggle Lok Anchor 5K is a versatile, portable precast concrete/steel anchorage connector, used exclusively for fall protection. It’s easy to install (just compress its spring and insert the cable shaft into the hole and can be inserted inside precast concrete and steel flanges. Designed for use in 12 inch thick cured precast concrete with a compression strength of at least 3000 p.s.i.

Where to Buy

A6005 – 3/4″ Precast Concrete Toggle Lok Anchor 5K

$172.94

The 3/4" Precast Concrete Toggle Lok Anchor 5K is a versatile, portable precast concrete/steel anchorage connector, used exclusively for fall protection. It’s easy to install (just compress its spring and insert the cable shaft into the hole) and can be inserted inside precast concrete and steel flanges. Designed for use in 12 inch thick cured precast concrete with a compression strength of at least 3000 p.s.i.

Where to Buy

A6101 – Beam Trolley 3″ – 10″ 5k

$399.62

The I-Beam Trolley Anchor (Part # A6101) is a Fall Arrest anchor designed to be used in combination with either a shock absorbing lanyard or an SRL. It may also be used for fall restraint and as a work positioning device. Its free moving rollers allow for smooth travel around the work area while always remaining connected. e safety locking toggles allow for easy adjustment and also eliminate the risk of accidental clamp slippage. For use by one worker with a combined weight of up to 310 pounds.

Where to Buy

A6102 – Beam Walker Super Slider 3″ – 12″

$166.30

The Beam Walker Super Slider 3" - 12" is a fall arrest anchor designed for use on the top flange of a steel I or H beam. Light, smooth, and easy to use, the Beam Walker Super Slider 3" - 12" is designed for fall protection, rope access and work positioning.

Where to Buy

A6103 – Beam Walker Super Slider 3″ – 14″

$160.34

The Beam Walker Super Slider 3" - 14" is a fall arrest anchor designed for use on the top flange of a steel I or H beam. Lighter, smoother, and easy to use, the Beam Walker Super Slider 3" - 14" is designed for fall protection, rope access and work positioning.

Where to Buy

A6104 – Beam Walker Super Slider 12″ – 30″

$354.35

The Beam Walker Super Slider 12" - 30" is a large version (30” capacity) fall arrest anchor designed for use on the top flange of a steel I or H beam. Light, smooth, and easy to use, the Beam Walker Super Slider 12" - 30" is designed for fall protection, rope access and work positioning.

Where to Buy

A6105 – Vertical/Fixed Beam Anchor 3″-14″ (5k)

$263.12

Malta Dynamics Vertical/Fixed Beam Anchor is designed for fall protection, rope access and work positioning. It is constructed with lightweight aircraft aluminum bars and 360 degrees swivel D-Ring connector. The clamps attach without tools to I-Beams either overhead or underfoot. This model has a breaking strength of 5,000 lbs. (22kN).

Where to Buy

Malta Dynamics A6200 - 5K Drop Through Anchor – 8.5′

A6200 – 5K Drop Through Anchor – 8.5′ w/4″ Round Plate

$110.68

The 5K Drop Through Anchor - 8.5' is a 5,000 pound capacity overhead anchorage connector. It is designed to drop through an opening in any 1—3/4 inch by 2 inch substrate, provided it is compliant with all applicable fall protection requirements. It is compliant with all ANSI Z359.1-2007 regulations, and is available in custom lengths upon request.

Where to Buy